What equipment is required for a PVC flooring production line?

Nov 17, 2026 Leave a message

Daniel Tan
Daniel Tan
Head of product marketing, Daniel is responsible for positioning Hansheng's products in the global market. His work includes developing marketing strategies and communicating our value proposition to customers worldwide.

 

A PVC flooring production line typically includes raw material preparation, mixing, plasticization, sheet forming, lamination, surface treatment, cooling, cutting and quality inspection. The exact equipment configuration depends on the flooring structure, production method and finished product specifications.

Homogeneous PVC flooring and heterogeneous multilayer flooring use different material structures and may require different processing arrangements. A typical line may include a mixing system, extruder, T-die, calender, printing and laminating equipment, embossing rolls, cooling section, cutting equipment and an automatic control system.

Raw material preparation and mixing equipment

Before processing, PVC resin, plasticizers, stabilizers, fillers, pigments and other additives must be measured and mixed according to the product formulation.

Material metering and feeding system

The material preparation system generally includes automatic weighing equipment, storage hoppers, vacuum loaders and conveying devices.

Automatic weighing equipment measures the main materials and additives according to the specified formulation. Vacuum loaders transfer materials into the mixing equipment while reducing dust release during feeding.

For production lines with multiple formulations, the dosing system should support the required material combinations and batch sizes. Its weighing accuracy must be matched to the quantity and type of each ingredient.

PVC mixing equipment

PVC flooring compounds are commonly prepared using a high-speed hot mixer and a cooling mixer. The hot mixer blends the resin, plasticizers, stabilizers and other additives under controlled mixing conditions. The cooling mixer then reduces the compound temperature before downstream processing.

Some production lines use an internal mixer or kneader to improve material dispersion and plasticization. A continuous mixer may also be selected for specific production requirements.

These mixing arrangements are alternatives or complementary configurations. A production line does not necessarily require every type of mixer.

Sheet forming and extrusion equipment

The forming section determines the thickness, width and surface condition of the PVC flooring sheet. Depending on the production route, the main equipment may include an extruder, T-die and calender.

Calendering line

A four-roll or five-roll calender can be used to form PVC flooring sheets and laminate different material layers.

The rolls apply pressure to the plasticized material, controlling sheet thickness and surface quality. Roll gaps, temperatures and rotational speeds must be adjusted according to the formulation and product dimensions.

For homogeneous vinyl flooring, calendering is commonly used to produce sheets with a consistent material structure throughout their thickness. It can also be used to prepare individual layers for multilayer flooring.

Extrusion line

An extruder plasticizes the prepared PVC compound and delivers the molten material to the forming die.

Depending on the formulation and production capacity, the line may use a twin-screw extruder, including a conical or parallel twin-screw configuration.

T-die

The T-die distributes the molten PVC across the required sheet width and forms a continuous flat sheet.

Die lip adjustment and temperature distribution affect the thickness and width consistency of the extruded material. The die must be configured according to the target product dimensions and extrusion conditions.

Some production lines combine internal mixing, extrusion and calendering. In these configurations, the extruder supplies the plasticized material to the calender, which completes thickness setting and lamination.

Printing, lamination and embossing equipment

Multilayer PVC flooring often requires additional processing equipment to combine its functional and decorative layers.

Printing equipment

Rotogravure printing machines or digital printing systems can be used to produce decorative patterns such as wood grain and stone textures.

Printing may be performed on a decorative film before it enters the flooring production line, or integrated into a separate online printing section. The printing method depends on the decorative material, pattern requirements and production arrangement.

Lamination equipment

Multilayer PVC flooring may contain a base layer, decorative film, transparent wear layer and balance or reinforcement layer.

Lamination equipment combines these materials through controlled heat and pressure. Depending on the production route, the process may use laminating rolls, a calendering lamination unit or a hot press.

The bonding conditions must match the material combination and product construction. Insufficient bonding can cause bubbles or layer separation, while excessive heat or pressure may deform the material.

Embossing machine

The embossing machine uses patterned rolls or plates to create wood grain, stone textures and other surface patterns.

The embossing pressure and roll temperature must be adjusted according to the material and surface design. For embossed-in-register (EIR) flooring, the embossing pattern must be aligned with the printed decorative design through synchronized registration control.

Cooling and stabilization equipment

After forming, lamination or embossing, the PVC flooring material requires controlled cooling and, where specified, further dimensional stabilization.

Cooling rolls and conveyor systems

Cooling rolls and cooling conveyors reduce the material temperature and help maintain its shape during subsequent handling. Cooling capacity must match the product thickness, line speed and material structure.

Annealing equipment

Some multilayer flooring products require an annealing section to reduce internal stress and improve dimensional stability. The need for annealing and its position in the production line depend on the flooring construction and manufacturing process.

Cutting and finishing equipment

After cooling and stabilization, the flooring material enters the finishing section. The equipment depends on whether the product is supplied as rolls, sheets, tiles or planks.

Slitting and cross-cutting machines

Slitting machines trim the material to the required width, while cross-cutting machines divide continuous sheets into specified lengths.

For flooring produced as individual tiles or planks, die-cutting or other sizing equipment may be used.

Edge trimming and profiling equipment

Edge trimming equipment removes uneven edges and excess material. Grinding and edge finishing machines can further process the cut edges.

For click-lock flooring, additional profiling equipment is required to mill the locking profiles along the edges of the planks.

Stacking and winding equipment

Sheet and plank production lines may use automatic stacking equipment to collect finished products. Lines producing roll flooring require a winding unit with suitable tension control to produce consistent finished rolls.

Online inspection and auxiliary control equipment

Quality inspection and control systems monitor the production process and help maintain consistent product dimensions and appearance.

Online thickness measurement

Laser or other online thickness gauges measure material thickness during production. When the measured value exceeds the specified tolerance, the control system can issue an alarm or trigger a corrective action.

CCD vision inspection

CCD vision systems can inspect surface defects such as scratches, bubbles, stains and color variations. The inspection criteria must match the flooring surface and product quality requirements.

PLC control system

The PLC coordinates the operation of the feeding, mixing, extrusion, calendering, lamination, cooling and cutting sections. It monitors and adjusts process parameters such as temperature, pressure and line speed to maintain coordinated operation.

The production line may also require auxiliary equipment such as roller temperature controllers, cooling water circulation systems, chillers and material conveying devices. These systems should be selected according to the production layout and equipment configuration.

Equipment configuration for different PVC flooring products

The equipment arrangement should be determined by the flooring structure rather than by treating all PVC flooring products as one manufacturing category.

For homogeneous vinyl flooring, the production line generally focuses on compounding, plasticization, calendering, cooling and cutting. Printing or additional surface finishing depends on the product design.

For heterogeneous multilayer flooring and LVT, the line may require separate layer preparation, decorative film feeding, lamination, embossing, surface coating and UV curing. The finished material then passes through cooling, cutting and inspection. Click-lock products also require edge profiling.

Two common production arrangements are continuous extrusion and lamination, and the preparation of separate sheets followed by hot-press lamination. Some manufacturers combine both approaches according to the product structure and production requirements.

Custom machining of components for PVC flooring production equipment

PVC flooring production lines contain calender rolls, roller shafts, mounting bases, connecting parts and other mechanical components. Their dimensions, surface condition and assembly accuracy affect the operation of the forming and conveying equipment.

When standard components cannot meet specific equipment or installation requirements, we can manufacture non-standard precision parts according to customer drawings. Hansheng Automation supports both single-piece and small-batch machining.

Our precision machining services also cover components for other industries, including packaging machinery, tobacco machinery, filling equipment, yacht equipment and RC racing cars. Components are manufactured according to customer drawings and individual machining requirements.

Mining--Metallurgical-Machinery