Industry News

A German dental instrument maker approved a first article, then learned eight months later that the supplier had rebuilt the fixture and moved the ...

A Swedish food-equipment builder sent one line to five suppliers: 2,000 stainless steel brackets, drawing attached, best price wins. Quotes came ba...

A Dutch machine builder placed a 1,800-piece order for stainless steel brackets. The samples were perfect. The first production batch arrived three...

A medical pump builder in Massachusetts sent us a shaft drawing with a ±0.005 mm diameter callout. His previous supplier measured every piec...

An automation integrator in Stuttgart sent us a drawing last year for a robot joint housing: 6061-T6, 2 mm walls, flatness held to 0.05 mm. His pre...

A bike shop in Germany ordered 40 mid drive e mountain bike units from a supplier on Alibaba. The spec sheet looked perfect: 250W mid motor, 48V 14...

An aerospace startup in Canada ordered 30 titanium brackets from a shop that advertised titanium CNC machining on its homepage. The parts arrived o...

A cam indexer looks like a sealed gearbox with a shaft sticking out, but it is the timing heart of any rotary dial machine, assembly turntable, or ...

A sourcing post for multi axis machining sells the same story every time: five axes, one setup, no repositioning, and surfaces that a three-axis ma...

The technical articles tell you how to cut hardened steel - the CBN grades, the speeds, the feeds, the depth of cut. The drawing is where hardened ...

Most product teams ask the wrong question. They ask whether cnc machining vs injection molding is better, and the factory answers with a comparison...

The shaft comes back from the CNC lathe, the print says ±0.01 mm, and it still won't seat right in the bearing block. Sound familiar? It...