Steel rolling involves several processes, including blooming, section rolling, hot strip rolling, cold strip rolling and steel pipe rolling. During production, rolls, roller tables, shearing equipment and transmission systems operate continuously. Steel strip, sections and pipes also present hazards associated with high-speed movement, high temperatures and elastic deformation.
Missing safety guards, improper operating procedures and inadequate isolation of hazardous energy during maintenance can result in mechanical injuries, struck-by accidents, burns, falls from height and drowning.
Each rolling section requires appropriate protective equipment and operating procedures based on its machinery and process conditions. Equipment interlocks, operator confirmation and maintenance safety controls must also be maintained.
Hazards and preventive measures in blooming operations
Mill overload and equipment failure protection
Potential hazards:
If the mill stand, rolls and drive shafts of a blooming mill lack overload protection, abnormal operating loads may cause equipment damage. Broken components or flying fragments can result in mechanical injuries and struck-by accidents.
Preventive measures:
Mill stands, rolls and drive shafts should be equipped with overload protection. Measures must also be taken to prevent fragments from flying out if equipment components fail. Safety devices must be inspected and maintained regularly to ensure proper operation. They must not be removed or disabled without authorization.
Side protection for blooming mills and pusher tables
Potential hazards:
If the sides of the blooming mill and its front and rear pusher tables lack protective plates, chains or metal mesh guards, flying scale and hot slag may strike nearby personnel, causing burns or other injuries.
Preventive measures:
Install suitable protective plates, chains or metal mesh guards along the sides of the blooming mill and its front and rear pusher tables. These barriers help reduce the risk of injury from flying hot scale and slag. Inspect their mounting and condition regularly, and repair damaged sections promptly.
Hazards and preventive measures in section rolling
Enclosure of the high-speed wire rod PF line
Potential hazards:
If the PF conveyor line in a high-speed wire rod mill is not properly enclosed, personnel may cross the operating conveyor line and come into contact with moving equipment or transported materials, resulting in mechanical injuries.
Preventive measures:
The high-speed wire rod PF line must be operated within an enclosed area. Unauthorized personnel must be prevented from entering the operating zone. Audible and visual alarms should be installed at intersections used by forklifts and pedestrians. The alarms and access barriers must be inspected and maintained regularly.
Safe operating procedures for straightening machines
Potential hazards:
If an operator on the upper platform starts the straightening machine without confirming that personnel working below are clear of the danger zone, workers may be caught or drawn into moving components.
Preventive measures:
Before starting the machine, the upper-platform operator must follow the "look, ask, jog and operate" procedure:
First, inspect the machine and surrounding area. Second, contact the relevant operators and confirm that they are ready. Third, jog the machine to check its response. Finally, start normal operation according to the operating procedure after confirming that conditions are safe.
The machine must not be started without confirmation and authorization from the operator working below.
Safety interlocks between equipment
Potential hazards:
If the machines on a dedicated section processing line do not have reliable safety interlocks, one machine may continue operating when another machine starts, stops or develops a fault. This can cause conflicting movements and mechanical injuries.
Preventive measures:
Reliable safety interlocks should be installed between the relevant machines on section rolling lines. Interlock functions must be inspected regularly. Unauthorized bypassing or disabling of safety interlocks is prohibited.
Protection in loop rolling sections
Potential hazards:
If a mill using loop rolling lacks suitable protective devices, personnel may come into contact with moving loopers and associated mechanical components, resulting in crushing or entanglement injuries.
Preventive measures:
Protective devices must be installed on mills using loop rolling to safeguard personnel. Their design should also allow safe maintenance access. Personnel must not enter unprotected hazardous areas while the equipment is operating.
Hazards and preventive measures in hot strip rolling
Protection for mill descaling equipment
Potential hazards:
During descaling, high-pressure water removes oxide scale from the steel strip surface. Without protective plates and water curtains, flying scale may enter the operating area and cause struck-by or other injuries.
Preventive measures:
Descaling equipment should be fitted with protective plates and water curtains to prevent flying scale from reaching personnel. These protective devices must be kept in good condition. Inspection and maintenance work must follow the equipment's safety procedures.
Protection around underground coilers
Potential hazards:
If the working area around an underground coiler and its upper section lack suitable protective structures, personnel may fall into the underground operating area. Steel strip moving out of control may also leave the rolling line and strike nearby personnel or equipment.
Preventive measures:
Install safety nets, protective plates or safety doors around the coiler working area. Guardrails must be installed above and around underground coilers. Steel strip catchers or other suitable protective devices must also be provided to prevent strip from leaving the rolling line. Inspect these facilities regularly to ensure that they remain secure and functional.
Protection along transfer roller tables
Potential hazards:
The roller tables between a hot strip finishing mill and the coiler transport hot steel strip continuously. Without protective barriers along both sides, abnormal strip movement or strip ejection may cause struck-by accidents or burns.
Preventive measures:
Protective barriers at least 0.3 m high must be installed on both sides of the roller tables between the hot strip mill and coiler. These barriers reduce the risk of injury from abnormal strip movement.
Safety during scale-flushing trench cleaning
Potential hazards:
If effective isolation and personnel supervision are not provided during cleaning of a scale-flushing trench and its associated water circulation system, another operator may accidentally start a pump. Water entering the trench can cause drowning. Openings around vortex wells and similar structures also present fall hazards.
Preventive measures:
Before entering the trench, stop the relevant equipment and isolate and lock the scale-flushing water supply and automatic pump-starting devices. Confirm that the associated energy sources have been effectively isolated and display warning signs prohibiting operation.
During cleaning, place a "Do Not Start Pump" warning tag at the water-flushing control button on the rolling mill operating console. Assign a designated person to coordinate communication and supervise the work. Install suitable fall protection, safety gates and warning signs at trench and vortex well access points.
Before restoring the water supply, confirm that all workers have left the trench and complete the required site safety checks. The pump room must not start the water supply pump until this confirmation has been obtained.
Hazards and preventive measures in cold strip rolling
Protection against strip breakage
Potential hazards:
If steel strip breaks during cold rolling, the broken strip head, tail or edge fragments may fly out at high speed. Without suitable protective devices, these fragments can cause struck-by accidents and equipment damage.
Preventive measures:
Cold strip mills must have protective devices to prevent foreign objects, broken strip sections and flying head, tail or edge fragments from injuring personnel or damaging equipment. The protective structures should cover the relevant hazardous areas and be inspected regularly.
Maintenance of roll equipment, shearing machines and auxiliary devices
Potential hazards:
During maintenance of roll equipment, shearing machines, wrappers and guide tables, components may move unexpectedly if safety pins or other reliable mechanical restraints are not installed. Gravity, hydraulic pressure or unintended machine movement can cause mechanical injuries and struck-by accidents.
Preventive measures:
Before maintenance, stop the equipment and isolate electrical, hydraulic and other hazardous energy sources. Apply lockout/tagout procedures. Insert safety pins or install suitable mechanical supports to prevent components from moving or falling, as required by the equipment design. Maintenance must not begin until the isolation and restraint measures have been verified.
Handling strip breaks and strip wrap-up around rolls
Potential hazards:
When strip breaks and wraps around the rolls of a thin strip mill, attempting to pull the strip head by hand can expose workers to injuries from elastic recoil, residual strip tension or unexpected machine movement.
Preventive measures:
Before clearing a strip break, stop the machine and isolate the relevant hazardous energy sources according to the maintenance procedure. Use dedicated tools to grip and remove the strip head. Never pull the strip directly by hand.
Do not begin clearing or removal work until residual strip tension has been released and the equipment has been confirmed safe.
Protection around cold rolling mill entrances, exits and coil car pits
Potential hazards:
The areas around cold rolling mill entrances and exits and the pits for coil cars may be deep. Missing guardrails create a risk of personnel falling into these areas. Oil contamination on the floor also increases the risk of slips and falls.
Preventive measures:
Install suitable guardrails and other protective structures around cold rolling mill entrances and exits and deep coil car pits. Clean oil contamination regularly and keep walkways dry, clean and unobstructed.
Protection between cold rolling mill stands
Potential hazards:
Cold tandem rolling mills contain high-speed strip and moving equipment between stands. Without movable safety gates or guardrails, personnel entering these areas may be struck by moving components or steel strip.
Preventive measures:
Movable safety gates must be installed between cold rolling mill stands. Where required by the equipment design, the gates should be integrated with the safety control system to provide the necessary interlocking and prevent unsafe machine movements when personnel enter the hazardous area.
Safe handling of production faults
Potential hazards:
If production faults are inspected or handled without stopping the equipment, or if warning signs are not displayed, another operator may restart the machinery unexpectedly, causing mechanical injuries.
Preventive measures:
Stop the equipment before handling a production fault, isolate the relevant hazardous energy sources and display a "Personnel Handling Fault, Do Not Operate" warning tag at the operating position.
For maintenance work, lockout/tagout procedures must also be followed. Work may begin only after the equipment has been confirmed safe from unexpected startup.
Hazards and preventive measures in steel pipe rolling
Safety interlocks between main and auxiliary equipment
Potential hazards:
Piercing mills, pipe rolling mills, sizing mills, reeling mills and reducing mills may cause abnormal movements and mechanical injuries if reliable electrical safety interlocks are not installed between the main machines and their associated auxiliary equipment.
Preventive measures:
Reliable electrical safety interlocks must be installed between the main equipment and corresponding auxiliary equipment. Inspect the interlock signals, control circuits and protective functions regularly to ensure that the machines operate under the required conditions.
Pipe breakage protection for cold rolling and cold drawing machines
Potential hazards:
During operation of cold pipe rolling mills and cold drawing machines, a broken pipe may cause the pipe tail to whip under residual energy. This can result in mechanical injuries or struck-by accidents.
Preventive measures:
Cold pipe rolling mills and cold drawing machines must have protective measures to prevent pipe breakage and pipe-tail whipping. The protective devices should be selected according to the machine structure and pipe processing range and inspected regularly.
Protection for roller tables after stretch-reducing mills
Potential hazards:
Steel pipes may travel at high speeds after leaving a stretch-reducing mill. Without roller table covers and a suitable outlet catcher, a pipe may travel beyond the end of the roller table, causing injuries or equipment damage.
Preventive measures:
Covers must be installed on roller tables downstream of stretch-reducing mills. For equipment with high outlet speeds, a pipe catcher or another reliable protective device must also be installed at the end of the roller table to prevent pipes from leaving the production line.
Safety during measurement and maintenance inside piercing mills
Potential hazards:
If the hydraulic and electrical systems are not properly isolated and locked during internal measurement or maintenance of a piercing mill, the machine may start unexpectedly. Hydraulic pressure release or movement of stored-energy components can also cause mechanical injuries.
Preventive measures:
Personnel must not enter a piercing mill for measurement or maintenance until the hydraulic and electrical systems have been isolated, locked and verified safe.
Before entering the machine, disconnect and lock the relevant power sources. Release or securely isolate residual hydraulic pressure and other stored energy, and apply lockout/tagout procedures. Entry is permitted only after the equipment has been confirmed safe.


