Main components of an automated clinical chemistry analyzer

Nov 21, 2026 Leave a message

Michael Chen
Michael Chen
Specializing in market analysis and strategy development, Michael provides insights into industry trends and competitor activities. His work helps shape Hansheng's market positioning and growth strategies.

 

An automated clinical chemistry analyzer combines mechanical systems, liquid handling, optical measurement, and computer control in one laboratory instrument. It automates sample and reagent dispensing, reaction mixing, signal measurement, and result calculation, reducing manual operations and improving the efficiency of routine clinical chemistry testing.

The internal structure varies depending on the analyzer model and level of automation. However, most systems include the following main components.

Sample and reagent handling system

The sample and reagent handling system stores and manages the liquids required for testing. The sample section holds specimens such as serum, plasma, and urine. Depending on the test procedure, it may also accommodate calibrators, quality control materials, and blank solutions. The reagent section holds the reagents required for different assays.

This system typically consists of sample carousels, reagent disks, sample racks, reagent bottles, and related identification components. Some analyzers have barcode readers to identify samples and reagents and manage test assignments. Certain models also include refrigerated reagent storage to maintain the required storage conditions.

Samples and reagents may be placed on separate carousels or loaded onto a shared sample/reagent carousel, depending on the analyzer design.

Sampling and dispensing system

The sampling and dispensing system transfers measured volumes of samples and reagents into reaction containers. Its main components may include sample probes, reagent probes, syringes, dilution devices, fluid lines, and associated drive mechanisms.

During operation, the sample probe aspirates the required sample volume according to the programmed test procedure. The reagent probe draws and dispenses the corresponding reagents. Syringes or other liquid metering devices control the aspiration and dispensing volumes to meet the requirements of each assay.

Some analyzers also include liquid-level detection, probe clog detection, and automatic washing functions. The sample and reagent probes are cleaned according to the instrument's operating procedure to reduce carryover between samples or reagents.

Reaction and mixing system

The reaction system provides the space where samples and reagents undergo chemical reactions. It typically consists of a reaction disk or carousel, reaction cuvettes, and a drive assembly. The cuvettes hold the sample and reagent mixture and move through designated positions for dispensing, mixing, incubation, and photometric measurement.

The mixing assembly usually includes a stirring rod, mixer arm, and drive mechanism. After the sample and reagents enter the reaction cuvette, the mixer operates according to the programmed procedure to ensure that the reaction mixture is properly mixed.

Reaction disk designs and cuvette arrangements differ between analyzer models. Some instruments use reusable reaction cuvettes that are automatically washed between tests, while others use disposable reaction containers.

Temperature control and reagent cooling system

The temperature control system maintains the reaction mixture at the required temperature. Since different biochemical assays have specific reaction conditions, the analyzer controls the temperature of the reaction area to reduce the effects of temperature variations on the measurement process.

Common components include an incubation bath, air-bath heating assembly, heating elements, and temperature sensors. The instrument regulates heating and temperature control according to the programmed settings to maintain a stable reaction environment.

The reagent cooling system maintains the storage temperature required by certain reagents. It serves a different purpose from the reaction temperature control system. Its configuration depends on the reagent requirements and the analyzer design.

Detection system

The detection system collects signals generated during sample reactions. It is an important part of the automated clinical chemistry analyzer. Common measurement methods include photometric analysis and electrochemical detection, depending on the tests supported by the instrument.

A photometric system typically includes a light source, optical filters or a diffraction grating, a photodetector, and signal processing circuits. During measurement, light passes through the reaction mixture in the cuvette. The photodetector receives the transmitted light and converts it into an electrical signal. The control system processes this signal with the relevant calibration data to calculate the analyte concentration or other test results.

Some clinical chemistry analyzers also include an ion-selective electrode (ISE) module for measuring electrolytes such as sodium, potassium, and chloride. The detection modules vary between models, and not every automated analyzer includes both photometric and electrode-based measurement systems.

Fluorescence spectrophotometers and flame photometers are used in specific analytical techniques. They are not standard components found in every routine automated clinical chemistry analyzer.

Washing and waste handling system

The automatic washing system cleans components such as sample probes, reagent probes, mixing assemblies, and reaction cuvettes. It removes residual samples and reagents to reduce their effects on subsequent tests.

Some analyzers include an automatic cuvette washing station that uses cleaning solutions and purified water for rinsing and liquid removal. This prepares reusable reaction cuvettes for subsequent measurements.

The waste handling system collects liquids generated during testing, including residual samples, reagents, and washing solutions. Some instruments also have waste-level sensors that issue an alarm when the waste container reaches a specified capacity, allowing operators to empty it when necessary.

Control system and data processing

The control system mainly consists of a microprocessor, control circuits, and operating software. It coordinates the operation of the analyzer's different functional modules.

During testing, the control system manages the sample and reagent dispensing sequence, dispensing volumes, reaction time, temperature, and measurement procedures according to the programmed test protocols. It also receives signals from the detection system and handles data processing, result calculation, operating status monitoring, and fault alarms.

Operators use a computer, keyboard, and display to select test parameters, monitor instrument operation, and manage test data. Depending on the analyzer configuration, the system may also connect to a laboratory information system (LIS) for transferring test information and results.

Result output and status display

The result output system presents and stores analytical data. The operating software can record test results, calibration information, quality control data, and historical operating records for future review.

The display shows testing progress, instrument status, alarm messages, and test results. Some analyzers also support printer connections for producing paper reports. Data storage methods and output interfaces depend on the instrument's hardware and software configuration.

An automated clinical chemistry analyzer relies on these systems working together. Their specific structures and configurations vary according to the analyzer model, testing capacity, and level of automation. Sample handling, liquid transfer, reaction temperature control, signal acquisition, and data processing form the main stages of its operation.

Custom machining of components for automated laboratory equipment

Automated clinical chemistry analyzers contain various mechanical structures and functional components, each with its own dimensional and assembly requirements. For non-standard mechanical parts that require custom manufacturing, we provide precision machining based on customer-supplied engineering drawings. This service supports the production of components for laboratory testing equipment and related automated systems.

Hansheng Automation also provides custom precision machining for components used in other industries. Our work includes yacht structural parts, tobacco packaging machinery components, filling machinery parts, and precision components for remote-control racing cars. We manufacture non-standard parts according to customer drawings to support different equipment manufacturing and assembly requirements.

Laboratory--Analytical-Instruments