The BF-type rotary toothed-plate bar screen cleaner is a mechanical screening machine used in wastewater pretreatment. It uses a circulating traction chain to move rake teeth through the screen openings, removing solid debris retained by the screen bars. The rake teeth capture and lift the debris, which is then discharged by the unloading mechanism at the top of the machine. This allows the equipment to remove suspended and floating solids from wastewater continuously and automatically.
The machine mainly consists of a frame, drive and speed reduction system, guide rollers, support rollers, an enclosed rotary traction chain, rake teeth, and screen bars. Its design uses double-tooth rakes and an enclosed traction chain to maintain the required cleaning path and reduce the risk of debris entering the transmission assembly and causing jamming.
Main structural components of the BF-type bar screen cleaner
Frame and support structure
The frame provides the main structural support for the bar screen cleaner. It holds the drive system, guide rollers, support rollers, and rake chain assembly in their operating positions.
The machine generally uses an integrated frame structure designed according to the dimensions of the collection pit or inlet channel. It is secured through support structures on both sides. Frame stiffness and installation accuracy affect the chain travel path and the engagement between the rake teeth and screen bars.
Drive and speed reduction system
The drive system mainly consists of an electric motor, gearbox, and associated transmission components. It supplies power to the rotary traction chain.
When the motor starts, power passes through the gearbox, which reduces speed and provides the required output torque. The output then drives the sprocket and traction chain. Depending on the machine configuration, mechanical or electrical overload protection can also be provided. If the rake teeth encounter excessive resistance or the transmission mechanism becomes obstructed, the protection device can stop the machine and help prevent further damage to the drive components.
Guide rollers and support rollers
Guide rollers and support rollers direct and support the rotary traction chain, keeping it on the designed closed-loop path.
As the chain passes through the lower section of the machine, the guide rollers change its direction, allowing the rake teeth to enter the upstream side of the screen bars and perform the cleaning operation. At the upper section, the chain changes direction again to discharge the screenings and return to the next cycle.
The installation positions and rotational condition of these rollers affect chain movement. They must be securely mounted and rotate freely to avoid misalignment, binding, and abnormal wear.
Enclosed rotary traction chain
The enclosed rotary traction chain is a key component for continuous debris removal. It is arranged in a closed-loop configuration and supported and guided by the drive sprocket, guide rollers, and support rollers.
Compared with exposed transmission arrangements, the enclosed chain design uses protective structural features to reduce the entry of fibers, plastic fragments, and other solid debris into the chain assembly. This lowers the risk of chain jamming and restricted movement.
Rake assemblies are installed on the traction chain at specified intervals. As the chain moves, the rake teeth pass successively through the submerged screening area and the upper discharge section.
Double-tooth rakes and screen bars
The rake teeth and screen bars are the main components responsible for capturing and removing debris.
The screen bars are arranged at specified intervals to allow water to pass while retaining solid material. Rake teeth attached to the traction chain enter the spaces between the bars and remove debris from the upstream side.
One feature of the BF-type design is its double-tooth rake arrangement. The two teeth are positioned at an angle to each other. When one tooth enters the screen opening to collect debris, the second tooth works with it to form a retaining space around the captured material.
This arrangement helps reduce debris loss as the rake assembly lifts the material out of the water.
Operating process of the BF-type rotary bar screen cleaner
The machine uses an electric motor and gearbox to drive the traction chain around a continuous path. The rake teeth perform underwater collection, debris lifting, and discharge at the top of the machine. The process involves the following stages.
Traction chain startup and circulation
After the machine starts, the motor drives the gearbox and output transmission components, causing the enclosed rotary traction chain to move along its designated path.
Multiple rake assemblies installed on the chain pass successively through the lower section, the upstream side of the screen bars, and the upper discharge area. Guide rollers and support rollers direct the chain as it changes direction, maintaining a continuous cleaning cycle.
Rake engagement and debris capture
When a rake assembly reaches the upstream side of the screen bars, its teeth enter the gaps between adjacent bars at the designed positions.
Wastewater flows through the screen openings, while larger floating debris, fibers, and other solid material are retained on the upstream side. The upward-moving rake teeth then remove the trapped material and carry it between the two teeth. Their angled arrangement helps prevent debris from falling away during lifting.
Debris lifting and transport
The traction chain continues moving upward, carrying the captured debris from the submerged section to the upper part of the machine.
During this movement, the double-tooth arrangement helps retain the screenings, while the enclosed traction chain keeps the cleaning assembly on its designated path and reduces the risk of debris entering the transmission components and causing obstruction.
Discharge at the top and rake return
When the rake assembly reaches the top of the machine, the traction chain passes around the upper guide rollers and changes direction. The rake teeth consequently turn or change their relative positions.
The lifted debris is released mainly under gravity and falls into a collection container or conveyor below. It can then be transferred to the designated collection area by downstream handling equipment.
After discharge, the rake assembly continues along the return path and moves back toward the lower section, ready for the next cleaning cycle. Some configurations can also include an auxiliary scraper to remove material remaining on the rake surfaces.
Installation characteristics of the BF-type rotary bar screen cleaner
Depending on the machine design, the BF-type unit can be installed by lifting the complete assembly, reducing the amount of on-site component assembly.
Some installation arrangements use two embedded steel plates, each measuring 620 × 150 × 16 mm, installed in the floor on both sides of the collection pit. The support plates on the machine frame are then connected or welded to the embedded plates.
This arrangement can simplify some civil works and installation tasks. However, the dimensions, positions, and connection method of the embedded plates must be confirmed against the equipment installation drawings and foundation load requirements. They should not be treated as standard foundation requirements for all bar screen cleaners.
Since the machine uses an integrated frame, its level and position on both sides must also be checked during installation. This ensures that the traction chain and guide mechanism operate correctly and prevents misalignment from causing contact between the rake teeth and screen bars.
Main features of the BF-type rotary bar screen cleaner
Double-tooth cleaning arrangement
The two rake teeth are positioned at an angle to each other and work together to retain debris during lifting, reducing material loss and improving screenings collection.
Enclosed traction chain
The enclosed traction chain and its protective structure reduce the risk of solid debris entering the chain assembly and causing jamming. This helps maintain stable transmission.
Continuous automatic cleaning
Multiple rake assemblies circulate with the traction chain to perform debris screening, lifting, and discharge. The machine can operate continuously or intermittently according to process requirements.
Integrated installation structure
Some models use a complete-unit lifting arrangement with embedded plate connections. This can reduce on-site assembly work and simplify installation and later maintenance.
Range of applications
The machine can be used in municipal water supply and drainage systems, pump station inlets, and various industrial wastewater treatment processes. It removes floating debris and larger solid particles, reducing the risk of blockage in downstream pumps, pipelines, and treatment equipment.
Custom machining of precision components for BF-type bar screen cleaners
The operating stability of a BF-type rotary toothed-plate bar screen cleaner depends on the machining accuracy and assembly quality of components such as traction sprockets, transmission shafts, guide roller shafts, rake connecting shafts, bearing housings, and frame mounting components.
For non-standard components required for equipment manufacturing, maintenance, or modification, Hansheng Automation provides custom machining based on customer-supplied drawings and manufacturing requirements. We support both single-piece and small-batch precision component production.
Our drawing-based machining services also cover parts for tobacco packaging and filling machinery, precision structural components for yachts, and components for radio-controlled racing cars. Manufacturing processes are evaluated according to the drawings and technical requirements of each component.


