What types of continuous casting machines are used today?

Nov 14, 2026 Leave a message

Karen Wong
Karen Wong
As a project manager, Karen oversees the entire lifecycle of projects from planning to execution. Her role ensures timely delivery of high-quality products to meet customer expectations.

 

Modern continuous casting machines can be classified according to their structural configuration and the path followed by the casting strand. They can also be categorized by the cross-sectional shape of the cast product.

Based on machine configuration, the main types include vertical casters, vertical-bending casters, straight-mold casters with progressive bending, straight-mold curved casters, curved-mold casters, multi-radius curved casters, and horizontal casters.

Based on the cross-sectional shape of the cast product, continuous casting machines include slab casters, large bloom casters, billet casters, round billet casters, and beam blank or other shaped-section casters.

These machines differ in installation height, strand bending and straightening methods, inclusion flotation conditions, and production capacity.

Vertical continuous casting machines

In a vertical continuous casting machine, the mold, secondary cooling section, withdrawal mechanism, and cutting equipment are arranged vertically. The strand moves downward after leaving the mold without undergoing bending or straightening.

Advantages:

The strand does not undergo bending or straightening during casting, avoiding the deformation stresses associated with these operations and helping reduce cracking.

Cooling conditions are relatively uniform.

Non-metallic inclusions in the molten steel can float upward more easily, helping improve internal strand quality.

Disadvantages:

The machine requires considerable installation height, increasing building height requirements and construction costs.

High ferrostatic pressure can cause strand shell bulging, which may affect product quality.

Vertical-bending continuous casting machines

A vertical-bending caster retains a vertical section below the mold. After passing through the withdrawal rolls, the strand is bent by a bending mechanism when it is fully or nearly fully solidified. It then enters the curved section before being discharged horizontally.

Compared with a vertical caster, this arrangement reduces overall machine height while retaining the benefits of a vertical section for inclusion flotation.

Advantages:

The machine is shorter than a vertical caster, reducing factory building height requirements.

The vertical section allows inclusions in the molten steel to float and separate more easily, promoting a more uniform distribution of inclusions.

Horizontal strand discharge allows the machine layout to be extended as needed. The billet cutting length is not directly restricted by the vertical discharge arrangement.

Disadvantages:

Bending and straightening occur at individual locations, resulting in concentrated deformation. This increases the risk of cracking.

The strand generally needs to be fully solidified before straightening, which limits withdrawal speed and production capacity.

Straight-mold continuous casting machines with progressive bending

This type of caster retains a vertical section and uses multiple bending points to gradually change the strand direction. Instead of bending the strand at one location, the machine distributes the deformation across several positions, reducing local stress concentration.

Advantages:

The vertical section helps non-metallic inclusions float upward, retaining some of the benefits of vertical-bending casters.

Progressive bending distributes strand deformation and reduces local stress concentration, lowering the risk of cracking.

Bending can begin before the strand is fully solidified. This removes the need to wait for complete solidification before entering the bending section, allowing higher withdrawal speeds and greater production capacity.

This arrangement provides a balance between installation height, strand deformation control, and production efficiency.

Curved continuous casting machines

Curved continuous casting machines are available with either straight molds or curved molds. The main difference lies in how the mold connects to the subsequent strand path.

Advantages:

The overall machine height is approximately 1/2 to 1/3 that of a vertical caster, reducing factory building height requirements.

The footprint is similar to that of a vertical-bending caster, and overall construction costs are relatively low.

Lower ferrostatic pressure reduces the risk of strand bulging and related cracking defects.

The machine can be extended more easily to increase the cooling and solidification distance, allowing higher casting speeds and greater production capacity.

Disadvantages:

The equipment occupies more floor space than a vertical caster.

Non-metallic inclusions in the molten steel tend to accumulate along the inner arc, potentially affecting internal strand quality.

Curved molds are more complicated to manufacture and machine.

In a straight-mold curved caster, the transition from the straight section to the curved strand path creates a tangent point at the mold exit. Breakouts can occur in this area.

Oval-type continuous casting machines (ultra-low-head casters)

Oval-type continuous casting machines, also known as ultra-low-head casters, use curved sections with multiple radii. The strand undergoes successive bending and straightening operations, gradually changing its direction while reducing the overall machine height.

Advantages:

The machine has a low overall height, reducing factory building height requirements and construction costs.

The strand undergoes multiple bending and straightening operations, with relatively small deformation at each stage. This helps control deformation stress and improve strand quality.

Lower ferrostatic pressure results in less strand shell bulging, helping reduce related quality defects.

Disadvantages:

As the strand follows a curved path, inclusions in the molten steel have fewer opportunities to float out and tend to accumulate along the inner arc.

The use of multiple curved radii makes caster alignment, installation, and adjustment more difficult. The equipment structure and maintenance requirements are also more complex.

Horizontal continuous casting machines

In a horizontal continuous casting machine, the mold and downstream withdrawal mechanism are arranged along a horizontal axis. The strand is withdrawn horizontally as it solidifies, without requiring a tall vertical equipment structure.

Main characteristics:

The overall machine height is approximately 1/10 that of a vertical caster, significantly reducing factory building height requirements and foundation construction costs.

The compact layout is suitable for continuous casting of certain metal materials and billet specifications.

The application of horizontal continuous casting depends on the metal being cast, billet cross-section, and production requirements. Its equipment configuration and industrial maturity must be assessed for each application rather than treating all horizontal casters as technically immature.

Continuous casting machines classified by billet cross-section

Continuous casting machines can also be classified according to the cross-sectional shape of the cast product.

Slab casters: Produce rectangular slabs used as feedstock for rolling steel plates and strip.

Large bloom casters: Produce large square-section blooms for subsequent rolling or forging.

Billet casters: Produce smaller square-section billets, commonly used as feedstock for bars and wire rod.

Round billet casters: Produce round-section billets for further processing into pipes and other cylindrical metal products.

Beam blank and shaped-section casters: Produce billets with specific cross-sectional profiles, including beam blanks used in H-beam production.

Each billet shape requires a corresponding mold design and caster configuration. Equipment selection should take the final product dimensions and downstream processing requirements into account.

Custom machining of components for continuous casting equipment

Continuous casting equipment consists of various mechanical structures and transmission components. During equipment manufacturing, maintenance, and modification, some parts require custom machining to meet specific mounting dimensions, structural designs, and operating requirements.

We provide precision machining based on customer-supplied drawings, supporting both single-piece and small-batch orders. Hansheng Automation machines transmission shafts, mounting structures, and other non-standard mechanical components for different equipment applications.

Our precision machining services also cover other industries, including structural components for yacht equipment, RC racing car parts, tobacco packaging machinery components, and parts for filling machinery. We manufacture these components according to customer drawings and equipment design requirements.

Mining--Metallurgical-Machinery