A segment is an important part of a continuous casting machine. It supports, guides, and conveys the cast strand through the secondary cooling and strand-guiding sections below the mold.
Depending on the strand path, segments are generally classified as bending segments (also called curved segments), straightening segments, and horizontal segments. They can also be classified by the cast section into slab, billet, and round billet segments. Slab and billet segments are the most common types used in production.
A segment is not a complete continuous casting machine. It is an individual equipment unit within the strand-guiding system. Its structural design and assembly arrangement vary among equipment manufacturers and depend on the caster configuration and production requirements.
Segment structure and operating process
Taking Angang's No. 1 slab caster as an example, the upper section uses an integrated assembly that includes the mold and foot rolls.
Molten steel enters the mold and gradually forms an initial solidified shell through cooling. The mold oscillates during operation, while the dummy bar pulls the strand downward. After leaving the mold, the strand is supported and guided by the foot rolls, which help protect the newly formed shell. It then enters the vertical section, where further cooling increases the shell thickness.
As the strand moves downward, it enters the bending section and gradually changes from a vertical to a curved path. It subsequently passes through the curved segments, straightening section, and horizontal section before being withdrawn and conveyed for further processing.
The segments along the casting line must maintain accurate roll gaps and installation positions to support and guide the strand and control its shape during operation.
Layout and advantages of curved continuous casting machines
In a curved continuous casting machine, the strand typically follows a path arranged along approximately one-quarter of a circular arc. Compared with a vertical-bending caster, this arrangement reduces overall machine height and equipment weight, helping lower part of the construction investment. Installation and maintenance are also relatively straightforward.
Another characteristic of curved casters is their lower ferrostatic pressure. The reduced static pressure on the solidifying strand helps limit shell bulging, which can reduce the risk of internal cracks and segregation associated with strand deformation.
This arrangement also allows higher withdrawal speeds and can improve strand quality.
Production capacity of different continuous casting machines
The production capacity of a continuous caster depends on the cast section, machine design, and equipment configuration. According to the figures provided in the original source, the reference annual capacities are as follows:
Large slab casters: Modern large slab casters generally have an annual production capacity of 2.0 to 2.5 million tonnes per machine. The original source records an annual production figure of 3.05 million tonnes at the U.S. Harper (LIV/Indiana Harbor) plant in 1987.
Bloom casters: A single machine can reach an annual production capacity of 800,000 to 1 million tonnes.
Multi-strand billet casters: A single machine can reach an annual production capacity of 600,000 to 800,000 tonnes.
These figures are reference values from the original source. Actual production depends on the equipment configuration and operating conditions.
The operating performance of a continuous caster is closely related to the condition of its segments. Segments support and guide the strand during casting. Their mechanical condition and roll gap accuracy affect strand stability and product quality. Segment design, manufacturing accuracy, and routine maintenance are therefore important considerations in continuous casting equipment management.
Custom machining of components for continuous casting machine segments
The manufacture and maintenance of caster segments involve various mechanical components, including roller shafts, bearing housings, support structures, and other transmission and connecting parts. Some components require custom machining to match the caster model, mounting dimensions, and actual operating conditions.
We provide precision machining based on customer-supplied drawings and support both single-piece and small-batch orders. Hansheng Automation machines shafts, bearing support components, and other non-standard mechanical parts according to equipment design and assembly requirements.
Our precision machining services also cover industries beyond steelmaking. These include structural components for yacht equipment, precision parts for RC racing cars, tobacco packaging machinery components, and parts for filling machinery. We manufacture non-standard components according to customer drawings for different equipment applications.


