A drum flying shear is a rotary cutting machine used in continuous rolling lines. It is commonly installed at the exit of continuous strip cold rolling mills and is mainly used for dynamic coil separation, strip head and tail cropping, cut-to-length operations, and emergency shearing.
The machine uses two rotating drums, one above the other, to drive the cutting blades through the shearing cycle. The strip can continue moving during cutting, so the production line does not need to stop for each operation. A blade clearance adjustment mechanism is also provided to accommodate different strip thicknesses and specifications.
Working principle of a drum flying shear
A drum flying shear cuts strip steel through the synchronized rotation of its upper and lower drums.
During operation, the two drums rotate at coordinated speeds. The blades mounted on the drums move with them. When the strip enters the cutting zone, the blades meet at the designated position and cut across the moving strip.
To maintain cutting quality, the rotational speeds of the two drums must remain synchronized. The blade speed at the cutting position must also match the strip speed to reduce unwanted stretching or compression during shearing.
The machine is equipped with a blade clearance adjustment mechanism that changes the lateral clearance between the upper and lower blades. The clearance can be adjusted manually or automatically according to strip thickness, material strength, and cutting requirements.
Applications of drum flying shears
Drum flying shears are mainly used in continuous strip processing lines, particularly in applications requiring cutting and coil separation without stopping production.
Pickling and rolling combined lines
In combined pickling and rolling lines, drum flying shears can perform dynamic coil separation and strip head and tail cropping. This allows strip cutting to be carried out during continuous production.
Fully continuous cold rolling lines
In fully continuous cold rolling lines, the drum flying shear is commonly installed at the line exit for dynamic coil separation. It reduces production interruptions caused by cutting and coil changeover operations.
Cut-to-length and emergency shearing
The equipment can cut strip according to preset coil weight or length requirements. It can also perform emergency shearing when an abnormal operating condition requires the strip to be cut.
Main components of a drum flying shear
A drum flying shear mainly consists of the shear body, drive unit, blade clearance adjustment mechanism, and lubrication system. These assemblies work together to drive the drums, perform cutting operations, and maintain equipment performance.
Shear body
The shear body is the main structural assembly. It mainly consists of a machine frame and upper and lower drum assemblies fitted with cutting blades.
The frame is generally a fabricated steel structure that supports the drums and associated transmission components. Cylindrical roller bearings support the upper and lower drums inside the frame and carry the radial loads generated during operation.
A pair of meshing helical gears is installed at each end of the drums, on both the drive side and the operator side. These gears act as synchronizing gears, ensuring that the upper and lower drums maintain the required speed relationship so that the blades meet at the correct position during cutting.
The blades are mounted on the drums and undergo a dedicated heat-treatment process to provide the mechanical properties required for repeated shearing operations.
Drive unit
The drive unit rotates the upper and lower drums and keeps them synchronized at the required operating speed.
During cutting, the drive system must overcome the shearing resistance of the strip while maintaining accurate synchronization between the drums. Its drive capacity and gear meshing condition therefore affect operating stability and cutting quality.
Blade clearance adjustment mechanism
Blade clearance is an important parameter affecting strip cutting quality. Different strip thicknesses and material strengths require different clearances between the upper and lower blades.
The adjustment mechanism changes the lateral blade clearance. Depending on the machine configuration, adjustment can be performed manually or automatically to suit different production specifications.
Lubrication system
The lubrication system supplies lubricant to the drum bearings, gears, and other moving components to reduce friction and wear during operation.
Proper lubrication helps maintain the operating condition of the bearings and transmission system. It also limits the effects of mechanical wear on equipment accuracy and service life.
Bearings and axial locating arrangement
Cylindrical roller bearings support the upper and lower drums inside the machine frame. They primarily carry the radial loads generated during drum rotation.
A thrust bearing is installed on the operator side to locate the drum axially and carry the corresponding axial load. This bearing arrangement limits axial movement and maintains the required positioning of the drums and cutting blades.
Maintenance and operating requirements for drum flying shears
Drum flying shears operate under high rotational speeds and frequent cutting cycles. Their blades, synchronizing gears, bearings, and adjustment mechanisms therefore require regular inspection.
Routine maintenance should include checking blade wear and clearance, synchronization between the upper and lower drums, gear meshing, bearing lubrication, and the axial positioning of the drums.
When uneven cut surfaces, cutting length deviations, or abnormal vibration occur, the cause should be investigated by checking the blade condition, drum synchronization, bearing operation, and drive system.
Custom machining of components for drum flying shears
The manufacture and maintenance of drum flying shears involve various mechanical components, including drum shafts, drive shafts, synchronizing gears, bearing housings, blade mounting components, and connecting parts. Different machine models have specific requirements for component dimensions, fits, and structural configurations.
We provide precision machining based on customer-supplied drawings and support both single-piece and small-batch orders. Hansheng Automation machines shafts, transmission components, bearing mounting structures, and other non-standard mechanical parts for rolling mills and automated production lines.
Our precision machining services also cover other industries, including structural components for yacht equipment, RC racing car parts, tobacco packaging machinery components, and parts for filling machinery. We manufacture non-standard precision components according to customer drawings for different equipment applications.


