Panoramic radiography and cone beam computed tomography (CBCT) are commonly used dental imaging techniques. However, they differ in their scanning paths, patient positioning requirements, and image acquisition methods. Panoramic radiography produces a two-dimensional curved tomographic image of the teeth and jaws, while CBCT collects projection data from multiple angles and reconstructs a three-dimensional image. These differences determine how the patient's head and the region of interest must be positioned during each examination.
Scanning path and imaging principles
Panoramic radiography
Panoramic radiography uses a curved-layer tomographic imaging principle. During exposure, the X-ray tube and image receptor move around the patient's head, generally rotating in opposite directions. Their coordinated movement produces a curved image covering the dental arches and upper and lower jaws.
Depending on the equipment design, panoramic systems may use double-center, triple-center, or continuously moving-center rotation mechanisms. The location and movement of the rotation centers affect the shape and width of the image layer.
The imaging region in panoramic radiography is known as the focal trough. Teeth and jaw structures located within this curved zone appear relatively sharp. When the patient's head is positioned incorrectly, the dental structures may fall outside the focal trough, resulting in magnification, reduced sharpness, distortion, or overlap between anatomical structures.
CBCT
CBCT uses a cone-shaped X-ray beam to acquire imaging data. During a scan, the X-ray source and two-dimensional flat-panel detector rotate around the patient's head or the selected anatomical region. The system collects projection data from multiple angles, typically over a rotation range of 180° to 360°, and uses computer reconstruction to generate a three-dimensional image.
Unlike panoramic radiography, CBCT does not require the entire dental arch to be positioned within a specific curved focal trough. Instead, the operator selects a field of view (FOV) that covers the anatomical region to be examined.
Depending on the equipment, the FOV can be adjusted to include individual teeth, the alveolar bone, or a larger maxillofacial region. The actual scanning path and rotation angle depend on the equipment design and examination protocol.
Patient positioning and operating requirements
Patient positioning for panoramic radiography
Panoramic imaging is sensitive to head positioning. The operator must position the patient's dental arches within the focal trough specified by the equipment. Common positioning steps include:
Use a bite block, chin rest, and head supports to help maintain the correct patient position.
Align the midsagittal plane of the head with the vertical positioning light to prevent lateral tilting or rotation.
Adjust the anteroposterior head position according to the equipment's positioning guides. The Frankfort plane is commonly positioned parallel to the horizontal plane.
Instruct the patient to place the tongue against the palate and keep the lips closed. This reduces the air space between the tongue and palate that can affect the resulting image.
Ask the patient to keep the head and body still during exposure to avoid motion-related blurring.
Positioning devices and exact alignment requirements vary between panoramic systems. Operators should follow the instructions provided by the equipment manufacturer.
Patient positioning for CBCT
CBCT positioning focuses on aligning the patient's head and the region of interest within the selected scanning volume while keeping the patient stable throughout the scan.
Common operating requirements include:
Select a standing, seated, or supine position according to the scanner design.
Use head supports, a chin rest, or a bite block, depending on the equipment, to reduce head movement.
Align the head and target region using the positioning lasers or other guidance systems provided by the scanner.
Select an appropriate field of view (FOV) according to the examination objective. The required teeth, alveolar bone, or maxillofacial structures must be fully included in the scanning volume.
Select the appropriate scanning protocol and instruct the patient to remain still during image acquisition.
Compared with panoramic radiography, CBCT does not require the entire dental arch to be aligned with a narrow curved focal trough. However, accurate positioning of the scanning center and region of interest is still necessary. Patient movement, positioning errors, or an incorrectly selected scan area can affect the reconstructed three-dimensional images.
Imaging field and image characteristics
Panoramic radiography produces a two-dimensional projection image that shows the upper and lower jaws, dental arches, and some surrounding anatomical structures in a single image. It is useful for examining the general condition of the teeth and jaws. However, the image is limited by the curved focal trough, and anatomical structures may overlap in the projection. Magnification and geometric distortion can also affect the visibility of certain details.
CBCT produces three-dimensional volumetric data that can be viewed in axial, coronal, and sagittal planes. Compared with conventional panoramic imaging, it reduces the overlap of different anatomical structures in two-dimensional projections and provides more detailed views of tooth roots, alveolar bone, and complex maxillofacial structures.
CBCT images can still be affected by metal artifacts, scattered radiation, and patient movement. Three-dimensional imaging does not eliminate all image distortion. Image quality also depends on the scanner's spatial resolution, voxel size, and acquisition parameters.
Radiation dose and scanning time
Panoramic radiography generally uses a lower radiation dose, with a relatively defined scanning area and exposure procedure. The radiation dose from CBCT varies according to the field of view, equipment model, tube voltage, tube current, exposure method, and scanning protocol.
In general, the effective dose from CBCT is higher than that from conventional panoramic radiography. The dose can also differ considerably between small-FOV and large-FOV scans. It is therefore not accurate to assume that a single-tooth CBCT examination delivers a radiation dose comparable to a panoramic radiograph in every case.
The scanning protocol should be selected according to the diagnostic requirements. The smallest field of view that adequately covers the region of interest should be used, together with exposure settings that provide sufficient diagnostic image quality while limiting radiation dose.
Scanning times also vary between equipment models and examination protocols. Panoramic radiography generally requires one rotational exposure, while CBCT collects projection data from multiple angles before computer reconstruction. The actual duration depends on the equipment, scanning range, and acquisition program. Image reconstruction time is separate from the X-ray exposure time.
Summary of positioning differences between panoramic radiography and CBCT
The main difference between the two imaging techniques lies in how the region of interest is positioned.
For panoramic radiography, the patient's dental arches must be aligned with the curved focal trough specified by the equipment. The anteroposterior position, left-to-right symmetry, and vertical head angle all affect image quality. Incorrect positioning can result in enlarged, distorted, or blurred dental structures.
CBCT positioning focuses on locating the scanning center and selecting the appropriate FOV according to the clinical examination objective. Head supports and positioning devices help keep the patient stable during image acquisition. Although CBCT does not require alignment with a curved focal trough, the operator must ensure that the target anatomical region is fully included in the scan and that patient movement is minimized.
Both techniques require accurate patient positioning, but their positioning references and operating priorities are different. The choice of examination method should depend on the clinical indication, the imaging information required, and radiation protection considerations.
Custom machining of components for dental imaging equipment
Dental imaging equipment contains various mechanical components, including positioning brackets, connecting parts, transmission components, and equipment housings. For non-standard mechanical parts that require custom manufacturing, we provide precision machining based on customer-supplied engineering drawings. Manufacturing is tailored to the structural and dimensional requirements of each component.
Hansheng Automation also provides custom machining services for other industries, including precision yacht components, remote-control racing car structures, tobacco packaging machinery parts, and filling machinery components. We manufacture non-standard parts according to customer drawings to support equipment manufacturers with their component production requirements.


