What Are the Main Machines in an Automatic Steel Coil Packaging Line?

Nov 18, 2026 Leave a message

Dr. Emily Carter
Dr. Emily Carter
As a leading technical expert at Hansheng Automation, Dr. Carter specializes in the R&D of next-generation intelligent electric actuators and control solutions. Her work focuses on integrating cutting-edge technology to enhance the performance and reliability of our gear reducers.

 

An automatic steel coil packaging line mainly consists of coil transfer and positioning equipment, wrapping machines, strapping machines, and supporting systems. Each unit handles a different stage of the packaging process, including coil handling, protective wrapping, strapping, and finished coil transfer. These machines work together under an automated control system to complete the packaging process.

The actual equipment configuration depends on the coil's inner diameter, outer diameter, width, weight, orientation, and protection requirements. Different coil specifications may require different conveying, wrapping, and strapping arrangements.

Main equipment in an automatic steel coil packaging line

Steel coil strapping machines

A strapping machine secures the steel coil and its packaging materials using steel straps or other strapping materials. It applies circumferential or radial straps to reduce the risk of packaging looseness and facilitate subsequent transportation and storage.

Depending on the strapping direction and packaging requirements, steel coil strapping machines generally include the following types:

Circumferential strapping machines: Apply straps around the outer circumference of the coil to hold the coil layers together and reduce the risk of loosening.

Radial strapping machines: Apply straps across the coil width or along its axial direction to secure the coil according to its structure and packaging requirements.

Through-eye strapping machines: Feed strapping material through the coil eye to secure the coil. This arrangement is used when required by the packaging specification.

Strapping machines can use steel straps, PET straps, or other materials suitable for the packaging requirements. A typical machine consists of a strap feeding mechanism, strap threading mechanism, tensioning unit, joint sealing device, and cutting mechanism.

During automatic strapping, the machine feeds and positions the strap, applies tension, joins the strap ends, and cuts the material according to the programmed sequence. The strapping method and number of straps depend on coil dimensions, packaging specifications, and transportation conditions.

Steel coil wrapping machines

A wrapping machine applies plastic film, composite paper, or other protective materials around the steel coil. This reduces the risk of moisture, dust, and external contact affecting the coil during storage and transportation.

Depending on the coil orientation and packaging method, different wrapping configurations can be used.

Orbital wrapping machines: Move the packaging material around the coil circumference through a rotating wrapping mechanism. They are suitable for continuous wrapping around the outer circumference.

End-face wrapping units: Apply protective materials to areas such as the coil eye and end faces, reducing exposure to contamination and physical damage.

Automatic film wrapping units: Apply plastic film or other protective materials to the outer coil surface according to the required coverage and overlap pattern.

A wrapping machine generally consists of a wrapping mechanism, packaging material holder, feeding unit, tension adjustment mechanism, and control system.

During operation, the material feed speed, wrapping speed, and overlap ratio must be adjusted according to coil diameter, width, and material properties. This helps maintain uniform coverage and reduces exposed areas, wrinkles, and loose packaging.

Steel coil transfer and positioning equipment

Coil transfer and positioning equipment moves incoming steel coils from the loading area to the packaging stations. After packaging, it transfers the finished coils to the next process or storage area.

The main equipment includes:

Coil cars: Support the steel coil and transport it to the designated packaging position. Some models include hydraulic lifting or positioning mechanisms to accommodate different coil dimensions.

Roller conveyors and chain conveyors: Transfer coils between packaging stations and coordinate with the wrapping and strapping equipment.

Coil upenders and downenders: Change the coil orientation according to the packaging process, such as converting between eye-to-horizontal and eye-to-vertical positions.

Turntables and positioning units: Adjust coil position and orientation to ensure accurate placement at the wrapping or strapping station.

Highly automated packaging lines may also include turntables, four-arm turnstiles, and automatic coil handling systems to improve transfer between stations.

Supporting systems for automatic steel coil packaging lines

In addition to wrapping, strapping, and coil transfer equipment, a complete packaging line generally requires auxiliary systems for packaging material supply, coil protection, inspection, and automated control.

Packaging material supply system

This system stores, feeds, and positions packaging materials for the wrapping and strapping machines.

Depending on the packaging process, it may include plastic film unwind stands, composite paper feeding units, steel strap feeding mechanisms, PET strap feeding units, and corresponding tension adjustment devices.

Some automatic packaging lines also include protective component forming equipment for manufacturing or supplying outer and inner coil rings, end-face protectors, and edge protection materials.

Protective material application equipment

For steel coils requiring additional surface protection, the packaging line can include coil eye sleeve insertion units, end-face protector installation mechanisms, and outer circumference protection equipment.

These units apply protective materials to the coil eye, end faces, or outer circumference, reducing the risk of impact damage, scratches, and contamination during transfer and stacking.

The protective structure should be selected according to the coil material, surface treatment, and transportation conditions.

Weighing and dimensional inspection equipment

Some automatic packaging lines include coil weighing systems, outer diameter measurement devices, and width measuring equipment.

These units collect data on coil weight, outer diameter, and width for packaging specification selection, label printing, and downstream warehouse management.

Production lines requiring product traceability can also include barcode scanners, label printers, and data recording systems.

Electrical and hydraulic control systems

The electrical control system generally consists of a PLC, HMI, sensors, drives, and associated electrical components. It coordinates coil transfer, wrapping, strapping, and indexing operations according to the required sequence.

Hydraulic and pneumatic systems provide power for coil lifting, turning, clamping, positioning, and other actuator functions.

Appropriate motion interlocks and safety protections must be provided between stations. For example, the next operation should not start if the coil has not been positioned correctly, the wrapping mechanism has not returned to its safe position, or an obstruction remains in the transfer area.

Equipment selection requirements for automatic steel coil packaging lines

An automatic steel coil packaging line is not a fixed combination of standard machines. Its configuration should be determined according to coil specifications, packaging methods, production cycle, and available floor space.

The main selection factors include:

Coil specifications: Confirm the coil inner diameter, outer diameter, width, and maximum weight to determine the load capacity of the transfer, wrapping, and strapping equipment.

Packaging method: Determine whether outer circumference wrapping, coil eye protection, end-face protection, circumferential strapping, or radial strapping is required.

Packaging materials: Select plastic film, composite paper, steel straps, PET straps, and other protective materials according to the surface protection requirements.

Automation level: Determine whether automatic loading, coil indexing, wrapping, strapping, weighing, and finished coil unloading are required to meet the production cycle.

Plant layout: Arrange conveyors, coil cars, and packaging stations according to the discharge direction of upstream rolling, slitting, or recoiling equipment.

Proper coordination between the equipment modules reduces manual handling and repetitive operations. It also helps establish a coordinated process from coil loading and packaging to finished coil transfer.

Custom machining of precision components for steel coil packaging equipment

The dimensional accuracy and machining quality of conveyor roller shafts, transmission shafts, positioning mechanisms, wrapping equipment shafts, and mounting structures affect the assembly and operation of an automatic steel coil packaging line.

Hansheng Automation provides custom machining of non-standard mechanical components based on customer-supplied drawings and manufacturing requirements. We support both single-piece and small-batch precision component production.

Our drawing-based machining services also cover parts for tobacco packaging and filling machinery, precision structural components for yachts, and components for radio-controlled racing cars. Manufacturing processes are evaluated according to the drawings and specific machining requirements of each component.

Mining--Metallurgical-Machinery