Structure of a Fully Automatic Membrane Plate-and-Frame Filter Press

Nov 21, 2026 Leave a message

Alex Zhang
Alex Zhang
With a background in mechanical engineering, Alex is dedicated to optimizing production processes for high-precision gear manufacturing. His expertise lies in ensuring the highest quality standards are met in every product.

 

A fully automatic membrane plate-and-frame filter press consists of several main assemblies, including reinforced polypropylene filter plates, a hydraulic system, an electrical control system, an automatic filter cloth cleaning device, a filter cloth flexing and shaking mechanism, an automatic liquid collection flap, and a hydraulically operated sludge hopper.

These components work together to carry out filtration, plate movement, filter cloth cleaning, cake discharge, and liquid collection with reduced manual intervention.

Reinforced Polypropylene Filter Plates

The filter plates are manufactured from a modified polypropylene formulation with an increased glass fiber content. This material provides stable chemical properties and good corrosion resistance. The plates are also described as non-toxic, odorless, lightweight, strong, and tough. Their relatively low weight makes manual cake removal less labor-intensive, while the material provides durability during normal operation.

The filter plate chambers feature a series of conical projections arranged in a specific pattern. The size, spacing, and angle of these projections are designed to influence filtration and dewatering performance. The drainage channel layout provides paths for filtrate discharge, helping increase flow rates and shorten filtration cycles.

The drainage grooves are made deeper to provide more space for filtrate flow and reduce the risk of blockage. This design also makes filter cloth installation and removal easier. The increased effective filtration volume allows the filter cake thickness to reach 30 mm, helping increase the amount of material processed in each cycle.

The filter plates are designed to produce filter cakes with relatively low moisture content. When the plate pack opens after filtration, the cake can detach from the filter cloth under its own weight without requiring separate manual removal.

Hydraulic System

The hydraulic station has a vertical layout. Its main functions are to close and open the filter plate pack and maintain the required hydraulic pressure during operation. The automatic pressure-holding function helps maintain stable clamping conditions and supports reliable equipment operation. The vertical arrangement also provides convenient access for inspection and maintenance.

The hydraulic cylinder is supplied by a Sino-German joint-venture hydraulic component manufacturer in Wuxi. Other hydraulic components, including check valves, directional control valves, and relief valves, are sourced from suppliers in Taiwan and Shanghai Huada Hydraulic Components Factory.

The hydraulic system consists of two main circuits.

Hydraulic Circuit for Plate Closing and Opening

This circuit consists of a power unit, a control system, and hydraulic actuators. The control system includes a high-pressure relief valve, pressure gauge, check valve, solenoid directional valve, pilot-operated check valve, low-pressure relief valve, and electrical contact pressure gauge.

The high-pressure relief valve sets the cylinder closing pressure, while the low-pressure relief valve regulates the plate-shifting pressure. The pressure-holding circuit uses a check valve and shut-off valve to maintain hydraulic pressure.

The solenoid directional valve controls the two main cylinder operations: closing and opening the filter plate pack.

The electrical contact pressure gauge monitors the pressure in the rear chamber of the hydraulic cylinder, which is the high-pressure chamber. When the pressure drops below the set value, the system automatically replenishes pressure to keep it within the required range throughout filtration.

Hydraulic Circuit for Automatic Plate Shifting

The automatic plate-shifting system uses a hydraulic motor to move the filter plates. It consists of a power unit, a hydraulic control system, and a hydraulic motor as the actuator.

The power unit uses a low-flow plunger pump, specified at 10 r/min. The control system includes a low-pressure relief valve and a solenoid directional valve.

The relief valve sets the hydraulic motor pressure for plate shifting at 3-4 MPa. This setting helps keep the plate movement speed within the required range. The solenoid directional valve controls the forward and reverse movement of the hydraulic motor, allowing it to pull and reposition the filter plates.

Electrical Control System

The electrical control system uses a programmable logic controller (PLC) for automatic operation. The system is designed for reliable and stable control and uses a human-machine interface (HMI) for operator input and monitoring.

The control system uses a Mitsubishi PLC module together with low-voltage electrical components from established domestic brands. The PLC has a compact structure, processing capability, and high reliability.

Its program can be modified to accommodate changes in the filtration process. The PLC also supports computer interfacing, allowing the system to be configured for remote control.

Automatic Filter Cloth Cleaning Device

The automatic cleaning device is installed below the filter plates. It consists of a movable cleaning frame, an oscillating cleaning rod, and a high-pressure cleaning pump.

Filter cloth cleaning takes place after cake discharge or after several filtration cycles, depending on operating requirements. High-pressure water is delivered through spray nozzles to remove residual material from the filter cloth.

The device uses a single swing-arm cleaning mechanism. Spray nozzles mounted along the cleaning assembly deliver high-pressure water in a mist pattern to clean the underside of the filter plates. The mechanism is designed for accurate positioning, stable movement, and uniform oscillation.

Its cleaning coverage is relatively wide, allowing two filter cloth surfaces to be cleaned in one operation. The cleaning pressure is maintained at 1 MPa. The enclosed design allows the cleaning process to operate automatically without requiring continuous on-site attendance.

Filter Cloth Flexing and Shaking Mechanism

The filter cloth flexing and shaking mechanism uses herringbone-shaped linkages installed near the upper middle sections on both sides of the filter plates.

Connecting rods, springs, and hooks link the filter cloth to the herringbone mechanisms. When the filter plates separate during cake discharge, the springs stretch and cause the linkages to move. This movement makes the filter cloth flex and vibrate, helping the filter cake detach from its surface.

The mechanism reduces the need for manual cake removal and additional external assistance during normal unloading operations.

This arrangement is particularly relevant to steel mill dust wastewater treatment. Such wastewater contains fine solid particles and can have relatively high viscosity, making filter cakes difficult to release from the filter cloth. The flexing and shaking mechanism helps loosen these cakes during plate separation.

Automatic Liquid Collection Flap System

The automatic liquid collection flap is installed below the filter plates. Its main function is to collect liquid that leaks from the filter cloth area during feeding and prevent it from mixing with the discharged filter cake.

During filtration, leaked liquid falls onto the collection flap and flows toward both sides of the filter press. It then enters a common collection tank through the drainage channels.

This arrangement is useful when filtering brine because it helps recover leaked salt solution and reduces liquid loss. It also collects filter cloth wash water, allowing the cleaning liquid to drain into a designated collection point. This reduces manual handling and helps keep the operating area cleaner.

The automatic opening and closing mechanism uses a low-speed motor operating at 4.8 r/min. The motor drives the collection flap through a coupling. Electrical components and sensing switches control the opening and closing movements according to the equipment operating sequence.

Hydraulically Operated Sludge Hopper

The sludge hopper is fabricated from 8 mm thick Q235 steel plate. Hydraulic cylinders operate the sector-shaped gates through their piston rods. The arrangement uses two hydraulic cylinders on one side to control gate opening and closing.

During filter cake discharge, the gates remain closed so that the discharged solids can accumulate in the hopper. The collected material can then be transported by truck. The welded steel structure provides mechanical strength, while the gate arrangement is designed to reduce material blockage during discharge and prevent leakage during storage.

The gate control system uses hydraulic pressure holding and solenoid directional valves to operate the opening and closing movements. The electrical control circuit uses relay-based control, providing a relatively straightforward control arrangement for reliable operation.

Custom Machining for Industrial Equipment Components

In addition to the mechanical components used in filtration equipment, Hansheng Automation provides drawing-based custom machining for non-standard precision parts across different industries. Our machining services cover components for packaging and filling machinery, precision parts for yacht equipment, and structural components for remote-controlled racing cars.

We support single-piece and small-batch manufacturing according to customer drawings and machining requirements, with a focus on component accuracy and assembly compatibility.

Environmental-Protection-Machinery