A six-high cold rolling mill mainly consists of entry-side auxiliary equipment, the six-roll mill stand, exit-side auxiliary equipment, and supporting systems. The mill uses a roll assembly consisting of work rolls, intermediate rolls, and backup rolls to achieve continuous plastic deformation of the metal strip. Hydraulic screwdown, roll bending, roll shifting, and automatic gauge control mechanisms regulate the rolling conditions and control strip thickness and flatness.
The configuration of uncoiling, coiling, roll adjustment, and automatic control systems varies between six-high cold rolling mill models. However, their main functional modules are generally similar.
Entry-side auxiliary equipment
The entry-side equipment handles coil loading, uncoiling, strip guiding, and entry tension control. It ensures that the strip enters the mill at a stable position and speed.
Coil loading and uncoiling unit
The coil loading and uncoiling unit typically consists of an uncoiler, a hydraulic expanding mandrel, a coil car, and a hydraulic push-off or centering device. The actual configuration depends on the mill's loading arrangement.
Hydraulic expanding mandrel: Clamps the inner diameter of the steel coil and rotates under the drive system to unwind the strip. Some machines use a double-cone arrangement in which hydraulic mechanisms adjust the positions of the cone heads to accommodate different coil specifications.
Coil car: Supports the incoming coil and transports it to the uncoiler position, assisting with coil loading.
Hydraulic push-off or centering device: Moves transversely to adjust the coil position and align its centerline with the mill centerline, reducing the risk of strip deviation when entering the mill.
Entry guiding and tension control unit
After uncoiling, the strip passes through guiding and tension control equipment before entering the roll gap.
Entry guide rolls: Guide the strip along the specified path and control its position and direction as it approaches the mill.
Entry pinch rolls and tension rolls: Depending on the mill configuration, these components assist with strip feeding or establish entry-side tension. Some mills use coordinated control of the uncoiler drive and tension roll assembly to regulate strip movement.
Strip centering device: Photoelectric or other position sensors can monitor the strip's lateral position. Hydraulic or electric actuators then adjust the guiding mechanism to reduce strip deviation.
Hot-rolled strip scale is generally removed through pickling or other surface treatment processes before cold rolling. High-pressure water descaling is primarily associated with surface treatment in hot rolling production and should not be considered a standard component of every six-high cold rolling mill entry section. Where online cleaning is required, an appropriate cleaning unit can be included according to the production process.
Six-roll mill stand and rolling equipment
The mill stand is the main part of a six-high cold rolling mill. Its main components include the six-roll assembly, roll gap adjustment mechanisms, flatness control equipment, and rolling parameter measurement devices.
Six-roll assembly
A six-high cold rolling mill consists of three pairs of rolls: work rolls, intermediate rolls, and backup rolls. Each pair contains an upper and a lower roll, giving six rolls in total.
Work rolls
The work rolls are the smallest-diameter rolls in the assembly. They directly contact the strip and apply rolling pressure to produce plastic deformation and reduce strip thickness.
Work rolls are installed in the mill housing through bearings and chocks. Their surface condition, wear, and installation accuracy affect strip surface quality and rolling stability. Some six-high mills also have work roll bending mechanisms to adjust elastic deflection and the transverse roll gap profile.
Intermediate rolls
The intermediate rolls are positioned between the work rolls and backup rolls. They transmit rolling loads and support the work rolls while also contributing to flatness control.
Depending on the mill design, the intermediate rolls may be equipped with bending and axial shifting mechanisms. Adjusting the bending force or axial position changes the roll contact conditions and the transverse roll gap profile, helping control strip crown and flatness.
Backup rolls
The backup rolls have the largest diameter in the six-roll assembly. They support the intermediate and work rolls and carry the loads generated during rolling.
Backup rolls are installed in the mill housing through bearing chocks. Their stiffness and bearing load capacity affect the load distribution throughout the roll assembly and the overall stability of the rolling process.
Roll gap adjustment and flatness control unit
A six-high cold rolling mill uses roll gap adjustment and roll profile control mechanisms to achieve the required strip thickness and flatness.
Hydraulic screwdown and AGC system: Hydraulic screwdown cylinders or other pressure adjustment mechanisms control the position of the roll assembly and the roll gap. Together with the automatic gauge control (AGC) system, they regulate the strip exit thickness. The control system can use rolling force, screwdown position, and exit thickness measurements as feedback signals.
Work roll bending system: Depending on the mill configuration, bending force is applied through hydraulic cylinders at the work roll chocks or associated support structures. This changes the elastic deflection of the work rolls and adjusts the transverse roll gap profile, helping control strip crown and flatness.
Intermediate roll bending system: Some six-high mills are equipped with intermediate roll bending mechanisms. Hydraulic actuators change the loading and deflection of the intermediate rolls, working together with work roll bending to control strip flatness.
Intermediate roll shifting mechanism: Hydraulic cylinders or other drive mechanisms move the intermediate rolls along their axial direction. This changes their contact positions relative to the work rolls, allowing adjustment of the roll gap profile and strip crown while also improving the distribution of roll wear. In mills using technologies such as CVC, intermediate roll shifting is an important flatness control method.
Roll bending and roll shifting are two different adjustment methods. Roll bending changes the elastic deflection of the rolls through applied bending forces, while roll shifting adjusts the relative positions of the rolls through axial movement. They should not be treated as the same type of adjustment.
Rolling parameter and flatness measurement unit
A six-high cold rolling mill is generally equipped with measurement devices for monitoring strip thickness, rolling force, and flatness.
Rolling force measurement system: Pressure sensors or load measurement devices installed in the mill's load-bearing structure collect rolling force data. These signals are sent to the control system for monitoring rolling loads and supporting related control functions.
Exit thickness gauge: Usually installed downstream of the mill stand, the gauge measures the actual strip thickness using the specified measurement technology. Its readings are fed back to the AGC system to assist with roll gap adjustment.
Flatness measuring roll: Usually installed on the exit side of the mill or at another designated measurement position along the production line. Segmented measuring elements detect the transverse tension distribution across the strip width. The results indicate the strip's flatness condition and provide feedback for work roll and intermediate roll bending and shifting control.
Flatness measurement and thickness measurement perform different functions. A flatness measuring roll primarily detects the transverse tension distribution and flatness condition of the strip. It does not directly measure thickness differences across the strip width. Strip thickness is generally measured by a separate thickness gauge.
Exit-side auxiliary equipment
The exit-side equipment guides the rolled strip, controls exit tension, and winds the strip into a finished coil. It ensures that the strip can enter the next production process or be coiled properly.
Exit tension and guiding equipment
Exit tension roll assembly: Equipped with the corresponding drive and control mechanisms, it works with the entry-side uncoiler and main mill stand to establish stable exit tension. Coordinating the speed and torque of the different drive units helps reduce tension fluctuations during strip transport.
Exit guide rolls: Guide the strip into the coiling section and maintain a stable running path, reducing lateral strip movement.
Strip steering device: Position sensors monitor lateral strip deviation, while hydraulic or electric actuators adjust the guide rolls or associated mechanisms to keep the strip within the specified running position.
Coiling unit
The coiling unit winds the rolled strip into a steel coil. It generally consists of a coiler, expanding mandrel, pinch or wrapper roll, and coil handling equipment.
Hydraulic expanding coiler mandrel: Clamps the inner diameter of the coil through an expansion mechanism and rotates under motor drive to wind the strip. The mandrel design and drive arrangement depend on the coil specifications and coiling load.
Wrapper or pinch roll: Some coilers are equipped with a wrapper or pinch roll to control strip contact during the initial winding stage, reducing gaps between coil layers and the risk of loose winding.
Coil handling equipment: A coil car or other auxiliary mechanism removes the completed coil from the coiler for subsequent transport and storage.
Shearing equipment
Different types of shearing equipment can be installed at the entry or exit section according to production requirements.
For example, crop shears remove irregular or defective strip ends. Flying shears cut the strip while it is moving, whereas stop shears operate after the strip has stopped.
If the production line needs to divide wide strip into multiple narrower widths, slitting equipment is also required. The type and installation position of the shearing equipment depend on the production process. Not every six-high cold rolling mill has the same shearing configuration.
Supporting systems
In addition to the entry, rolling, and exit equipment, a six-high cold rolling mill requires hydraulic, lubrication and cooling, and electrical control systems for stable operation.
Hydraulic power system
The hydraulic system generally consists of hydraulic pump stations, oil reservoirs, servo valve groups, proportional valve groups, accumulators, and pipelines. It supplies hydraulic power to the screwdown, roll bending, roll balancing, and roll shifting mechanisms.
Some mills also use hydraulic systems for mandrel expansion, roll changing, and other auxiliary operations. The specific actuators depend on the machine design. The main coiler drive is generally powered by a separate motor and transmission system.
Lubrication and cooling systems
The lubrication and cooling systems serve the rolls, bearings, transmission components, and strip rolling zone.
Bearing and transmission lubrication: Depending on component design and lubrication requirements, the mill may use centralized lubrication, grease lubrication, circulating oil lubrication, or oil-air lubrication for roll bearings, gearboxes, and related transmission components.
Rolling emulsion circulation system: Spray equipment delivers rolling emulsion to the contact area between the rolls and strip. The emulsion reduces friction and temperature during rolling while carrying away part of the generated heat. The circulation system usually includes filtration, cooling, and fluid treatment equipment to maintain the required emulsion condition.
The lubrication method should be selected according to bearing type, rotational speed, load, and equipment manufacturer's requirements. Grease lubrication should not be regarded as a standard arrangement for every six-high cold rolling mill.
Electrical and automation control system
The electrical control system coordinates the main mill drive, entry-side uncoiler, exit-side coiler, hydraulic actuators, and measurement devices. It ensures that the production line operates according to the specified process parameters.
The main components and their functions include:
PLC control unit: Handles machine logic, actuator coordination, interlock protection, and operating status monitoring.
Human-machine interface (HMI): Allows operators to set rolling parameters, monitor machine status, view alarm messages, and record production data.
Main and auxiliary drive systems: Motor drives and variable-speed drive equipment control the operating speeds and torque of the mill, uncoiler, and coiler. They maintain speed coordination and strip tension throughout the production line.
Automatic gauge control (AGC): Uses feedback from thickness gauges, rolling force measurements, and roll gap position signals to adjust the screwdown mechanism and control strip exit thickness.
Automatic flatness control (AFC): Uses flatness measurement results to coordinate work roll bending, intermediate roll bending, and roll shifting mechanisms, improving transverse thickness distribution and strip flatness.
Custom machining of precision components for six-high cold rolling mills
The operating accuracy of a six-high cold rolling mill depends on the machining quality of its roll support structures, transmission components, mounting interfaces, and mechanical connections. For non-standard mechanical components required for equipment maintenance, modification, or manufacturing, Hansheng Automation provides custom machining based on customer-supplied drawings and manufacturing requirements. We support both single-piece and small-batch precision component production.
Our drawing-based machining services also cover components for other equipment manufacturing applications, including parts for tobacco packaging and filling machinery, precision structural components for yachts, and components for radio-controlled racing cars. Manufacturing processes are evaluated according to the drawings and specific machining requirements of each part.


