A steel continuous casting machine is a complete production system that converts molten steel into solid cast products through a continuous process. Its structure can be divided into six functional systems: the molten steel supply and distribution system, mold forming system, secondary cooling system, withdrawal and straightening system, cut-to-length system, and automation and auxiliary systems.
These systems operate in sequence to transfer molten steel, form the initial solidified shell, withdraw and cool the strand, straighten it, and cut it to the required length.
Molten steel supply and distribution system
The molten steel supply and distribution system transfers steel from the ladle to the mold at a controlled and stable rate. Its main components are the ladle turret and tundish.
Ladle turret
The ladle turret supports the steel ladles and rotates to change their positions during casting. It moves the ladle containing molten steel into the pouring position above the tundish. When a ladle needs to be replaced, the turret changes positions to maintain continuous production.
Tundish
The tundish is located between the ladle and the mold. It receives molten steel from the ladle and distributes it to the mold through internal flow channels and flow control devices.
The tundish acts as a buffer and distribution vessel. It helps stabilize the steel flow and provides conditions for non-metallic inclusions to float to the surface before the steel enters the mold.
Mold forming system
The mold forming system is responsible for the initial solidification of molten steel. Its main components are the mold and mold oscillation mechanism.
Mold
The mold generally uses a water-cooled copper structure. Its main function is to extract heat from the molten steel and form an initial solidified shell with sufficient thickness and strength along the mold walls.
The mold cross-section determines the basic cross-sectional dimensions of the strand. Its cooling capacity and dimensional accuracy affect the strand surface quality and initial solidification conditions.
Mold oscillation mechanism
The mold oscillation mechanism operates together with the mold, producing periodic movements at a specified stroke and frequency.
Its main purpose is to improve lubrication between the mold and the solidified shell, reduce friction and sticking, and allow the strand to move out of the mold smoothly. Proper oscillation helps reduce the risk of sticking-related breakouts.
Secondary cooling system
When the strand leaves the mold, its surface has formed an initial solidified shell, but liquid steel usually remains inside. The secondary cooling system further reduces the strand temperature until the liquid core gradually solidifies.
Its main components include the foot roll section, secondary cooling spray section, and strand guide rolls.
Foot roll section
The foot rolls are located immediately below the mold outlet. They support the strand as it leaves the mold. At this stage, the solidified shell is still relatively thin and the interior contains a large amount of liquid steel. The foot rolls provide mechanical support and containment to prevent excessive shell deformation.
Secondary cooling spray section
The secondary cooling section uses multiple spray nozzles to apply water to the strand surface. Cooling intensity is adjusted in different spray zones to control the solidification process.
Different steel grades and casting speeds require different cooling conditions. The water flow in each spray zone must therefore be adjusted according to the actual operating conditions.
Strand guide rolls
Strand guide rolls are arranged along the strand path. They support and guide the strand through the secondary cooling zone.
In curved casters, the guide rolls follow the curved strand path and help control deformation while maintaining the required cross-sectional shape and position.
Withdrawal and straightening system
The withdrawal and straightening system pulls the strand through the caster and performs bending, straightening, and horizontal transfer according to the machine configuration. Its main components include the withdrawal machine, straightener, and run-out roller table.
Withdrawal machine
The withdrawal machine generally consists of multiple driven pinch rolls. These rolls grip the strand and provide the traction required for continuous movement.
The withdrawal speed must be coordinated with the molten steel pouring rate and the strand's solidification condition. A mismatch can affect the stability of the casting process.
Straightening machine
The straightening machine is mainly used in curved casters to gradually straighten the strand as it moves along the curved path.
Depending on the equipment design, multi-point or continuous straightening can be used. The process controls strand deformation and stress while accommodating different cross-sectional dimensions.
Run-out roller table
The run-out roller table receives the straightened strand and transfers it to the downstream cutting station. Its operation must be coordinated with the withdrawal and cutting equipment to ensure smooth strand movement.
Cut-to-length system
The cut-to-length system divides the continuously moving strand into specified lengths. Its main components include the cutting machine and billet transfer equipment.
Cutting machine
Depending on the strand cross-section, steel grade, and production requirements, the caster may use a flame cutting machine or mechanical shear.
The cutting equipment operates according to the specified cut length to produce billets that meet the requirements of subsequent rolling or processing operations.
Billet transfer equipment
The billet transfer system moves the cut sections to a slow-cooling pit or downstream finishing area, making them available for subsequent production processes.
Automation and auxiliary systems
The automation and auxiliary systems monitor casting conditions, adjust process parameters, and provide lubrication and protection for equipment operation.
The main components include the secondary cooling water distribution system, equipment lubrication and sealing systems, and online inspection systems.
Secondary cooling water distribution system
The secondary cooling water distribution system regulates the water flow in each spray zone.
On production lines equipped with appropriate temperature measurement devices, the system can collect strand surface temperature data and use it together with the steel grade, casting speed, and process settings to adjust the water flow automatically. This helps maintain suitable cooling conditions throughout the casting process.
Equipment lubrication and sealing systems
The pinch rolls, withdrawal and straightening rolls, and other moving components require regular lubrication to reduce friction and wear.
The lubrication system supplies lubricant to the relevant components. Sealing arrangements help prevent cooling water, iron oxide scale, and other contaminants from entering bearings and transmission components.
Online inspection system
The online inspection system monitors key casting parameters, including mold steel level, strand cross-sectional dimensions, and surface quality.
The measurement signals are fed back to the control system to support equipment condition monitoring and process parameter adjustments.
Custom machining of components for steel continuous casting equipment
Steel continuous casting machines contain various mechanical and transmission components, including roller shafts, bearing housings, roll support parts, mounting bases, and connecting structures. Different caster designs and equipment specifications require components with specific dimensions, geometries, and fitting requirements.
We provide precision machining based on customer-supplied drawings and support both single-piece and small-batch orders. Hansheng Automation machines shafts, bearing support components, and other non-standard mechanical parts for industrial equipment.
Our precision machining services also cover other industries, including structural components for yacht equipment, RC racing car parts, tobacco packaging machinery components, and parts for filling machinery. We manufacture non-standard components according to customer drawings and equipment requirements.


