How to quickly deal with and eliminate the problem of oil leakage in the gearbox coupling table?

Nov 05, 2024 Leave a message

Gearboxes are equipment widely used in industrial enterprises, and there is a phenomenon of oil leakage at the joint surface. Not only does it cause economic losses, but severe oil leakage can also lead to reduced or broken oil in the gearbox, exacerbating the wear of the gear meshing surface and resulting in biting or peeling, leading to equipment damage. Severe oil leakage will prevent the gearbox from functioning properly.

Reducer for packaging machinery produced by high-speed assembly line


The reason for oil leakage on the surface of the gearbox joint


1. When the gearbox is working, the friction generated by the meshing of each pair of gears inside the gearbox will generate heat, and as the gearbox operates for a longer period of time, the temperature inside the gearbox will increase, causing gas expansion and resulting in leakage of other gaps such as the partition surface or shaft extension seals.


2. The structural design of the gearbox is unreasonable, there is no ventilation cap, the cover plate is too thin, the joint surface is uneven, and the contact gap leaks oil; Box, oil will leak out from the gaps generated; If the oil tank is not returned to the box, lubricating oil will accumulate in the shaft seal, end cover, joint surface, etc. Under the pressure difference, lubricating oil will accumulate from the gaps.


3. Lack of emphasis on ideology and improper operation when sealing the gearbox.


4. Excessive fuel consumption. A large amount of oil accumulates in areas such as shaft seals and joint surfaces.


5. Long term lack of maintenance leads to the production of many impurities and iron filings inside the machine, which accumulate over time and prevent impurities from depositing. The iron filings cannot be cleaned up, resulting in gear meshing and the formation of pitting stones.


How to quickly deal with and eliminate oil leakage problems? In addition to the conventional method of replacing gaskets, most companies also adopt external treatment methods. But the effect is not satisfactory.


Oil Leakage Repair Technology for Gearbox Joint Surface


Polymer composite material repair technology is currently a mature and cost-effective repair solution. It is a two-component composite material based on high molecular weight polymers and mixed with curing agents. Solid content 100%, solvent-free, solidifies at room temperature after mixing, and does not shrink during the curing process. Suitable for cold welding repair of mechanical wear, scratches, pits, cracks, casting sand holes, and other parts on any material metal or hard non-metal surface. The construction method is simple and does not require special tools, making it easy to solve industrial maintenance problems. After solidification, the product can undergo various mechanical processing to restore its original precision. Has extremely strong adhesion to the surfaces of various metals and non-ferrous metals. It can also be used for cold casting molding, especially suitable for cold forming of tight fitting workpieces.