The gearbox simulation experimental platform can conveniently simulate typical fault phenomena of gear equipment, such as missing teeth, wear, pitting, cracks, and broken teeth. It can also replace gears according to experimental needs, compare vibration signals of different degrees of gear damage, and extract them. This facilitates the research and verification process of fault diagnosis methods for researchers, and provides a basis for gear fault diagnosis, providing a reliable experimental carrier for researchers to obtain fault signals.

The application functions of the gearbox simulation test bench include:
·1. Analysis of spur gears, helical gears, and planetary gears
·2. Vibration characteristics of gear faults, such as gear teeth missing or broken, gear resonance, noise, and shaft cracks research
·3. Effects of wear, clearance, and eccentricity of misaligned gears
·4. Geometric shape and transmission ratio of gear load effect
·5. Gearbox vibration is affected by lubrication, temperature, and pollution
·6. Working deflection deformation and modal analysis of gearbox
·7. Research and Technology on the Installation of Vibration Sensors
Defects such as surface wear, tooth breakage, and pitting can be observed in spur or helical gears. It can also include rolling element bearing defects such as damage to the inner and outer rings and rolling elements. Gap adjustment can be used for gap research.
Add different types of faults one by one to the gearbox, or add them simultaneously to study the interaction of defects. The speed can be controlled through a frequency converter to study the impact of speed changes on damaged gearboxes and the characteristics of vibration spectrum changes, as well as the influence of damaged and worn gears on vibration characteristics.
