How servo motors and servo controllers work together perfectly

Aug 23, 2024 Leave a message

Friends who have used servo motors know that it is generally used with servo controllers, and it can also be used as servo drives. Generally, the motors and controllers on the market are sold as a whole, so they are like a pair of inseparable good friends, contributing to the operation of machinery and equipment. Let's take a look at how the motor and servo controller are installed today, and a reasonable installation can make them perfectly combined and play the greatest role.

 

Installation:

 

1. When installing, the immovable part must be fixed, generally the 4 fixed immovable threads behind the driver.

 

2. In the whole process of installation, we must pay attention to whether the smoke and dust enter the servo motor controller to prevent the application of the driver from being endangered. The servo motor controller is properly installed at a very large level and also on the guardian servo motor.

 

3. the installation of the spacing must also pay attention to, the spacing is generally with reference to the installation design drawing, the spacing is generally caused by a better drive performance indicators stronger, the service life can be increased.

 

info-400-300

4. It is necessary to pay attention to the installation direction, and the direction is the vertical standing direction.

 

5. The problem of heat exhaust must be fully considered during installation, in order to better make the servo motor run more smoothly, the temperature in the general servo motor cabinet is maintained below 55 °C.