How does an infrared length measurement system work on a continuous casting machine?

Nov 14, 2026 Leave a message

Alex Zhang
Alex Zhang
With a background in mechanical engineering, Alex is dedicated to optimizing production processes for high-precision gear manufacturing. His expertise lies in ensuring the highest quality standards are met in every product.

 

An infrared length measurement system on a continuous casting machine uses infrared detection to identify the position of the cast strand. By combining the detection signal with real-time speed data from a speed sensor, the control system calculates the strand's travel distance. When the calculated length reaches the preset cutting dimension, the system sends a command to the cutting equipment.

The process involves three main stages: infrared detection, signal conversion, and length calculation with cutting control.

Infrared transmission and reception

An infrared length measurement system commonly uses a through-beam detection arrangement. An infrared transmitter and receiver are installed on opposite sides of the strand travel path. The transmitter directs an infrared beam toward the receiver, creating a fixed detection area.

When the leading end of the strand enters this area and blocks the beam, the receiver detects a change in light intensity and generates a corresponding detection signal. The control system uses this signal to mark the moment the strand reaches the detection position, establishing the starting reference for length measurement.

Optical signal conversion

The infrared receiver converts changes in received light intensity into electrical signals. A signal processing circuit then generates the corresponding switching or pulse signals.

When the strand interrupts the beam, the sensor output changes state. The control system identifies the arrival time of the strand's leading end and uses this event as the starting point for length calculation.

Signal stability affects the reliability of length measurement. The transmitter and receiver must therefore be installed in the correct positions, with the optical path properly aligned and maintained.

Strand length calculation and cutting control

After detecting the leading end of the strand, the control system uses real-time speed data from the speed sensor to calculate the distance traveled from the detection position.

When the strand moves at a constant speed, its travel distance can be calculated using:

Length = Speed × Time

When the strand speed varies, the control system needs to accumulate the distance using continuously updated speed data. This provides a more accurate measurement of the actual travel distance.

Once the calculated length reaches the preset cutting value, the PLC sends a cutting command to the cutting equipment, which then performs the cutting operation.

With proper coordination between the detection sensor, speed feedback, control response, and cutting mechanism, the system can achieve millimeter-level length control. This reduces errors associated with manual measurement and operation while improving billet length consistency and production line efficiency.

Custom machining of components for infrared length measurement systems

The installation and operation of infrared length measurement systems also involve mechanical components such as sensor mounting brackets, detector fixtures, guide structures, and other supporting parts. Their dimensions and mounting configurations must match the equipment layout and detection positions.

We provide precision machining based on customer-supplied drawings and support both single-piece and small-batch orders. Hansheng Automation machines sensor mounting structures, shafts, equipment supports, and other non-standard mechanical components according to equipment design requirements.

Our precision machining services also cover other industries, including structural components for yacht equipment, RC racing car parts, tobacco packaging machinery components, and parts for filling machinery. We manufacture non-standard components according to customer drawings for different equipment applications.

Mining--Metallurgical-Machinery