The heating plate in an Uhlmann blister packaging machine is selected in two parts: the heating element and the substrate or carrier plate. Main material options are below.
Common heating element materials
Molybdenum disilicide (MoSi₂): One of the common high-temperature heating elements. Above 400°C it forms a dense quartz glass passive film, so oxidation resistance is good. It is brittle at room temperature and should not be struck.
Metal heating elements: Pure metals or alloys such as molybdenum, tantalum, and tungsten. They have high melting points and can reach very high temperatures, above 2000°C, in vacuum or inert atmosphere. They oxidize easily, so they must be used in a protective atmosphere or vacuum. Cost is high and machining is difficult.
Graphite: Good electrical conductivity. It can be used as a heating element in vacuum or inert atmosphere, up to about 2500°C. It oxidizes easily at high temperature and needs protection.
Carbon fiber or carbon felt: Newer materials. They heat up quickly and have good high-temperature strength. They also oxidize easily.
Common substrate and carrier plate materials
Mica board: Made from natural or synthetic mica. Good insulation, even heat conduction, good flexibility, and low cost. Working temperature is usually below 500 to 800°C. It is a common substrate for low- and medium-temperature heating plates.
Ceramic plates:
Alumina ceramic (Al₂O₃): A common high-temperature substrate. Purity is 95% to 99%. It has good insulation, thermal conductivity, and mechanical strength. Cost is moderate. It suits most industrial heating applications.
Aluminum nitride ceramic (AlN): Thermal conductivity is much higher than alumina. Its coefficient of thermal expansion matches silicon chips. It is a good material for electronic packaging and heat dissipation substrates, but cost is high.
Silicon carbide (SiC): High hardness, good thermal conductivity, high-temperature resistance, and corrosion resistance. It is brittle, hard to machine, and costly.
Metal substrate: Common materials are aluminum alloy and stainless steel. They have good thermal conductivity and are easy to machine and install. They are usually not insulating, so insulation is needed between the substrate and the heating element, such as resistance wire. Working temperature is usually below 500°C.
Composite materials: For example, a mica plus ceramic composite board. It combines the advantages of both and is used in specific temperature ranges.
If replacement heating plates, carrier plates, or insulating bases are needed, Hansheng Automation can machine them from customer drawings in single pieces or small batches.


