What is the performance of PVD coating to improve the cutting performance of cutting tools?

May 01, 2025 Leave a message

The performance criteria related cutting tools are increasing more and higher as the level of the equipment manufacturing business keeps improving, therefore the tools must be able to turn high hardness materials, which presents a fresh challenge to the function of PVD coated tools. Low hardness and poor wear resistance of the conventional PVD coating make it difficult to handle in high-precision machining. The PVD coating method has lately included many new features to satisfy the tool performance under diverse working situations because to constant innovation and research and development.

 PVD coating to improve the cutting performance of cutting tools

Reduction of three-way force

The so-called three-way force of the cutting tool refers to the back force, feed force and cutting force occurring when the tool is machining the workpiece. The larger the three-way force, the more serious the cutting tool wear. If a PVD coating is applied to the surface of the tool, it can ensure that the three-way force of the tool changes smoothly during machining without an upward trend, thus reducing the wear condition of the cutting tool and improving the cutting function. Especially in the traditional PVD coating to increase the rare earth elements, on the reduction of the three-way force effect is more significant, can improve the internal stress of the coating, reduce the molten droplets of the appearance of the tension, which all play a role in reducing the frictional resistance of the tool effect. Because of the reduction of three-way force, it helps to improve the service life of the tool.

 

Reduce the coefficient of friction

Two main aspects define the source of cutting force: (1) material deformation resistance: comprising the elastic-plastic deformation resistance of the cutting layer metal (including the plastic flow resistance in the chip formation stage) as well as the elastic recovery resistance of the processed surface metal; (2) interface friction effect: the friction resistance between the tool front face and the chip, and the back face and the newborn surface of the workpiece. Thus, a thorough study of the friction properties between many tool materials and the machined material has great technical significance for improving cutting force distribution and retarding tool wear. The fact that the friction coefficient will have notable dynamic variations under intermittent cutting settings owing to the extreme changes in the contact interface state generated by the occasional breaking and discharge of chips should be particularly underlined. Experimental results reveal that PVD covered tools have an average coefficient of friction between 15 and 30% lower than uncoated tools.

 

Improve machining quality

Coated tools have a significant effect on improving machining quality, low exterior roughness, workpiece cutting surface is flat and smooth, no residual chips and other impurities. The uncoated tool cutting hardened 45 steel is machined after the appearance of the roughness is very large, and there is a large degree of corrugation.