What Is Polypropylene? A Comprehensive Guide to PP Plastic and Its Applications

Jul 01, 2025 Leave a message

What is polypropylene?

 

Polypropylene (PP) is a thermoplastic polymer with a semi-crystalline structure, primarily produced through polymerization processes using natural gas and other petroleum products. Propylene monomers undergo chain-growth polymerization during the polymerization reaction to form polypropylene. After polymerization is complete, the polypropylene is extruded into long fibers, which are then processed through a granulator, where the fibers are cut into pellets. These pellets can be further processed using standard thermal processing techniques, such as injection molding. Polypropylene is typically produced in two forms: homopolymer and copolymer. Among these, homopolymer polypropylene is the most common type, while copolymer polypropylene is relatively less common.

 

Polypropylene Materials

 

CNC Machining Process for Polypropylene

 

1) Raw Material Pretreatment and Polymerization

 

Propylene monomer purification:

 

Polymerization-grade propylene must have a purity of >99.5%, with impurity levels (such as sulfur and water) <50 ppm, to ensure uniform internal stress in the material during CNC machining.


Catalyst System Influence:


PP produced using metallocene catalysts has a narrow molecular weight distribution (MWD = 2–3), resulting in regular flake-shaped chips during machining, which facilitates automatic chip removal by CNC machining centers. In contrast, PP produced using traditional Ziegler-Natta catalysts (MWD = 5–8) tends to form chips that wrap around tools, requiring a 20% increase in coolant usage.

 

2) Melt forming and CNC pre-processing

 

Extrusion pelletizing process:

 

The temperature of the twin-screw extruder is controlled at 200-230°C, and the melt flow rate (MFR) is controlled at 15-25 g/10 min to ensure that the tool wear rate during CNC machining is <0.01 mm/h. A certain automotive parts factory uses PP-H particles with an MFR of 20, achieving a CNC milling speed of up to 12,000 rpm and a surface roughness Ra < 3.2 μm.

 

Injection molding pre-processing:


Mold temperature is controlled at 40-60°C, with a holding time of 10-15 seconds to reduce internal stress in the molded part. After ANSYS simulation optimization, when the residual stress of the PP injection-molded part is <5 MPa, the dimensional deviation after CNC machining is <0.03 mm (traditional process deviation is 0.1 mm).

 

3) Core CNC machining process

 

Cutting parameters and production efficiency:


In CNC milling of extruded sheets (10 mm thick), an 8 mm coated end mill is used with a spindle speed of 10,000 rpm and a feed rate of 1,200 mm/min, reducing single-process machining time by 40% compared to traditional aluminum alloy processing. A certain electronics manufacturing plant used these parameters to process PP insulating plates, achieving a daily production capacity of 500 pieces with a yield rate of 98%.

 

Tool wear and cost control:


Ceramic tools (Al₂O₃/TiC) have a lifespan of 300 pieces per edge when machining PP, which is twice that of carbide tools (150 pieces per edge), but the cost increases by 25%. It is recommended to use carbide tools for small-batch customization and switch to ceramic tools for large-scale production to reduce the cost per piece.

 

4) Post-processing techniques and production closed-loop

 

Surface modification integration:


After CNC machining, PP parts undergo plasma treatment (200W power, Ar gas), increasing surface tension from 30 mN/m to 45 mN/m. Subsequent paint adhesion reaches Grade 5B (crosshatch adhesion test), an improvement of three grades compared to untreated parts.


Scrap material recycling:


PP debris generated during CNC machining (approximately 15% of total material) can be recycled through grinding and pelletization, and reused for injection-molded low-load parts (e.g., packaging clips), achieving a production closed-loop system.

 

PP Plastic product

 

What are the properties of PP?

 

Physical properties:


Density is only 0.9 g/cm³, lighter than water, with tensile strength reaching 23.4 MPa, outperforming most thermoplastic plastics.


Wide temperature range (-30°C to 120°C), capable of withstanding boiling water and microwave heating, suitable for food packaging.


Chemical Properties:


Highly resistant to acids, alkalis, alcohols, and oils, widely used in chemical storage tanks and pharmaceutical packaging.


Processing Properties:


Excellent melt flowability, easy to injection mold, can be processed into extremely thin biaxially oriented polypropylene (BOPP) film for food packaging and labels.

 

PP – Main Types & Their Comparison

 

What are the types of PP?

 

Homopolymer (PP-H):


Polymerized from a single propylene monomer, high crystallinity, high rigidity, used for woven bags, fibers, and microwave-safe containers.


Block copolymer (PP-B):


Polymerized from ethylene and propylene blocks, it has excellent impact resistance and is commonly used in automotive components such as bumpers and battery boxes.


Random copolymer (PP-R):


Ethylene is randomly distributed, resulting in high transparency and good low-temperature toughness, making it widely used in pipes and transparent packaging.

 

Comparison of polypropylene with HDPE (high-density polyethylene) and ABS


What are HDPE and ABS?


HDPE is a branch of the polyethylene (PE) family, produced from ethylene monomers (C₂H₄) via a low-pressure polymerization process. Its molecular chains have extremely low branching (almost no long side chains), with tightly packed molecules and a crystallinity of 60%–80%, resulting in a high density (0.93–0.96 g/cm³). ABS is a terpolymer made by polymerizing acrylonitrile (AN), butadiene (BD), and styrene (ST).

 

Property

Test Standard

Polypropylene (PP)

High-Density Polyethylene (HDPE)

ABS

Density (g/cm³)

ASTM D792

0.9

0.96

1.05

Tensile Strength at Break (MPa)

ASTM D638

23.4

31.7

40 (30–50)

Izod Impact Strength (Notched, J/m)

ASTM D256

427 (converted from 4.27 J/cm)

69.4 (converted from 0.694 J/cm)

200 (100–400 for high-impact grades)

Hardness (Shore D)

ASTM D2240

72

70

85 (70–100)

Maximum Service Temperature (Air, °C)

-

82.2

71.1

90 (80–100)

Melting/Glass Transition Behavior

-

Melting Point: 160–168°C (semicrystalline)

Melting Point: 180–205°C (semicrystalline)

Glass Transition Temp (Tg): 105°C (amorphous); Processing Temp: 220–260°C

UV Resistance

-

Poor (requires UV stabilizers)

Poor (requires UV stabilizers)

Poor (requires UV stabilizers)

Chemical Resistance

-

Resistant to dilute/concentrated nitric acid, alcohols, alkalis

Resistant to dilute/concentrated hydrochloric acid, reducing agents, oxidizing agents

Resistant to water, dilute acids/alkalis; Not resistant to concentrated acids, ketones (e.g., acetone), aromatics (e.g., benzene)

Water Absorption (% by weight)

ASTM D570

0.02

0.1

0.3 (0.2–0.4)

 

What are the common uses of polypropylene plastic?

 

Packaging industry:


Corrugated polypropylene: Replaces cardboard for fresh food packaging and transport pallets, offering waterproof durability and recyclability.


BOPP film: High transparency and moisture resistance, used for snack food bags and cigarette boxes.


Industrial and construction:


Polypropylene sheeting: Resistant to chemical corrosion, used for chemical storage tank liners and laboratory countertops.


Composite materials: Combined with fiberglass to make car bumpers, lightweight and impact-resistant.


Medical field:


Sterile packaging for syringes, medicine bottles, etc., as it is non-toxic and can be sterilized at high temperatures.

 

PP Plastic bottle

 

In summary, polypropylene is not only widely used in the field of CNC machining, but as the steel of plastics, it is used in almost every plastic market.