What equipment is needed to produce aluminum plate?

Nov 16, 2026 Leave a message

Daniel Tan
Daniel Tan
Head of product marketing, Daniel is responsible for positioning Hansheng's products in the global market. His work includes developing marketing strategies and communicating our value proposition to customers worldwide.

 

Aluminum plate production involves several stages, including melting, casting, rolling, heat treatment, and finishing. The main equipment includes melting furnaces, holding furnaces, casting machines, slab scalping machines, heating furnaces, hot rolling mills, cold rolling mills, straightening equipment, and cutting machines. The actual equipment configuration depends on the aluminum alloy grade, product thickness, required temper, and selected production route.

Melting and holding furnaces

Melting furnaces melt aluminum ingots, recycled aluminum, and other charge materials to supply molten metal for casting. During melting, the chemical composition is adjusted according to the required product specifications to ensure that the alloy meets the target grade.

After melting, the aluminum usually undergoes refining, degassing, and filtration to reduce dissolved gases and nonmetallic inclusions. Holding furnaces maintain the molten metal at a suitable temperature and provide a stable supply for the casting process.

Melting furnaces, holding furnaces, and associated refining equipment form the main metal preparation system for aluminum plate production.

Casting equipment

Casting equipment converts molten aluminum into slabs or strip stock for subsequent rolling. It connects the melting process with the rolling operations.

A common production route uses semi-continuous casting equipment to produce rectangular aluminum slabs suitable for rolling. Some production lines use continuous casting and rolling equipment, which solidifies the molten aluminum into strip stock that can then enter subsequent rolling operations.

These casting methods require different production line configurations. Slab casting lines generally require additional slab sawing, scalping, and preheating equipment. Continuous casting and rolling lines can reduce the need for some conventional slab preparation and hot rolling operations.

Slab scalping equipment and homogenizing furnaces

For production lines using cast slabs, the slab surfaces are usually prepared before rolling. A slab scalping machine removes surface layers containing oxides, segregation, and other casting-related defects. This reduces the risk of these defects being carried into the finished product during rolling.

Homogenizing furnaces heat and hold the cast slabs to improve the distribution of alloying elements, modify the cast microstructure, and reduce certain internal stresses. This treatment prepares the material for subsequent hot rolling.

The exact sequence of scalping and homogenization depends on the alloy composition and the production process.

Hot rolling mills

Hot rolling mills reduce the thickness of heated aluminum slabs by applying pressure through rotating rolls. The process produces hot-rolled plate or coil.

A hot rolling line generally includes roughing and finishing mills. Roughing mills perform the main thickness reduction, while finishing mills further control the final thickness, flatness, and surface quality.

Thick aluminum plate may proceed directly to heat treatment and finishing after hot rolling. Products requiring further thickness reduction need additional cold rolling.

Cold rolling mills

Cold rolling mills further reduce the thickness of aluminum plate or strip while improving dimensional accuracy, flatness, and surface finish.

The equipment may use reversing mills or tandem rolling mills, depending on product specifications and production capacity. During rolling, the roll gap, rolling force, and operating speed are controlled to achieve the required thickness and surface quality.

Products requiring multiple cold rolling passes may undergo intermediate annealing. This reduces work hardening and restores ductility so that further reductions can be carried out.

Heat treatment furnaces

Heat treatment furnaces perform annealing, solution heat treatment, and other thermal processes according to the requirements of the aluminum alloy.

Annealing reduces work hardening caused by cold working and improves ductility and formability. It can also reduce some residual stresses. For heat-treatable aluminum alloys, solution heat treatment, quenching, and aging can be used to improve strength and hardness.

However, not all aluminum alloys can be strengthened through heat treatment. For example, many wrought alloys in the 1xxx, 3xxx, and 5xxx series rely mainly on work hardening for strength. Their heat treatment requirements differ from those of heat-treatable alloys in the 2xxx, 6xxx, and 7xxx series.

The furnace type, temperature cycle, and holding time must therefore be selected according to the alloy grade, product thickness, and required temper.

Straightening and flatness correction equipment

Aluminum plate may develop bending, residual stress, or flatness defects during rolling, cooling, and heat treatment. Straightening and flatness correction equipment is used to correct these conditions.

Common equipment includes roller levelers, tension levelers, and stretch levelers. Roller levelers apply alternating bending through multiple rolls to correct local curvature and flatness defects. Tension levelers combine longitudinal strip tension with bending deformation to improve strip flatness. For thicker aluminum plate, stretch levelers can apply longitudinal stretching to improve overall flatness.

The appropriate equipment depends on plate thickness, dimensions, alloy temper, and required flatness.

Cutting and finishing equipment

Cutting equipment processes rolled and straightened aluminum products into the required dimensions and shapes. Common machines include shears, saws, slitters, and cut-to-length lines.

Slitting lines divide aluminum coils into narrower strips of specified widths. Cut-to-length lines cut continuous strip into sheets of the required length. Thick aluminum plates are generally cut to size using plate saws.

Some production lines also include washing equipment, surface treatment systems, edge trimming machines, and coating equipment to meet specific surface quality and downstream processing requirements. After cutting, the products undergo inspection for dimensions, thickness, surface condition, and relevant mechanical properties before packaging and storage.

Equipment configuration and production routes for aluminum plate

The equipment used in aluminum plate production is not the same for every manufacturing process. A typical route based on slab casting includes:

Melting and holding → Slab casting → Slab scalping → Homogenizing and preheating → Hot rolling → Cold rolling (if required) → Heat treatment → Straightening or stretch leveling → Cutting and finishing → Quality inspection.

For continuous casting and rolling, molten aluminum can be converted directly into strip stock. The material then undergoes processes such as cold rolling, annealing, leveling, and cutting to produce the required aluminum sheet or plate products.

Hansheng Automation provides custom machining of nonstandard mechanical components for aluminum rolling and processing equipment according to customer-supplied drawings. We accept both single-piece and small-batch orders. Our drawing-based machining services also cover functional components for tobacco packaging and filling machinery, as well as precision parts for yacht equipment and radio-controlled racing cars.

Mining--Metallurgical-Machinery