Flange indexer is a kind of cam splitter, which has high precision, no noise, no flutter, can carry out long-term high-speed movement, and has a simple internal structure.
Hansheng Automation Co., Ltd. has been focusing on indexers for more than 10 years, the company has rich experience in R&D and manufacturing of dividers, and also has a very unique insight into the internal structure and principle of this flange divider! Then let the engineers of Hansheng Automation explain it to you!
1. The price is cheap, and many years of R&D and production have created advanced and rich production experience, and at the same time achieved low prices.
2. There is no gap, the cam roller often has 2~3 places to keep in contact when the flange type splitter is running, and there is no contact gap in the front and back directions.
3. The part of the needle roller bearing is not a bearing in the usual sense, but is composed of a bearing and a roller pin.
4. There is no noise, no chatter, and the rollers under the bearing support roll smoothly on the optimized design of the sub-cycloid gear.
The feed accuracy (rotation-to-straight line ratio) and position-determining accuracy are close to the accuracy of the screw.
Reciprocating positioning accuracy: precision grade 15μm; ordinary grade 30μm.
There will be no unpleasant knocking or meshing sounds. Vibrations are also greatly reduced.
5. It can carry out long-term high-speed movement.
6. The internal principle structure is simple, and it is composed of only two basic parts, cam and foundation mechanism, and the degree of freedom in design is extremely high. It is easy to install and reduces the overall cost.
The structure and principle of the flange splitter are actually very simple, understand these six points, I believe that you can also use it freely!