Types of straightening machines

Nov 16, 2026 Leave a message

Sarah Lee
Sarah Lee
As the head of quality assurance at Hansheng Automation, Sarah is committed to maintaining and improving the quality of our products. She ensures that all components meet stringent industry standards before delivery.

 

Straightening machines are commonly classified into four types according to their operating principles and structural arrangements: press straighteners, roller straighteners, inclined-roll straighteners, and stretch straighteners. Each type applies a different method of deformation and is suited to particular workpiece shapes, dimensions, and straightening requirements.

Press straighteners

A press straightener corrects a bent workpiece by applying pressure through a ram, producing controlled plastic deformation to reduce the original curvature. The machine generally uses a mechanical or hydraulic pressing mechanism. The workpiece is positioned on support points or dedicated fixtures, and the ram applies straightening force at the required location.

For workpieces with significant bending or long dimensions, operators can make several corrections at different positions along the workpiece. The location and amount of each press operation depend on the actual bending condition.

Press straighteners are commonly used for shafts, bars, tubes, plates, and welded fabrications. They can also be used to correct deformation in certain castings and forgings. This method is suitable for large workpieces, complex structures, and applications that require localized correction.

Roller straighteners

A roller straightener mainly consists of multiple straightening rolls, usually arranged in two staggered rows, with one row positioned above the other. As the workpiece passes through the rolls, it undergoes repeated bending in alternating directions, gradually correcting its original curvature.

The entry rolls generally apply larger bends to produce the plastic deformation needed to change the material's original shape. The following rolls progressively reduce the amount of bending and correct the remaining curvature. This sequence of alternating bends reduces the residual curvature along the workpiece.

Roller straighteners are widely used for straightening plates, strips, bars, wires, and certain structural profiles. The number, diameter, spacing, and arrangement of the rolls are selected according to the material's cross-sectional shape, dimensions, and required straightness.

Inclined-roll straighteners

An inclined-roll straightener, also known as a cross-roll straightener, has rolls whose axes are set at an angle to the direction of material travel. When the workpiece enters the roll assembly, the friction and force generated by the rolls cause it to move forward while rotating around its own axis. This produces a helical feed path through the machine.

During this movement, the workpiece undergoes continuous bending as it advances and rotates. Different positions around its circumference are therefore subjected to the straightening process. Unlike conventional parallel-roll straighteners, which mainly correct curvature through alternating bending in a fixed roll arrangement, inclined-roll straighteners use workpiece rotation to achieve straightening around the circumference.

Inclined-roll straighteners are mainly used for round bars and tubes, particularly hollow tubes that require straightening around their circumference. During operation, the roll inclination angle and roll reduction must be adjusted according to the workpiece diameter, material properties, and straightening requirements.

Stretch straighteners

A stretch straightener applies tensile force along the length of the workpiece to produce controlled plastic elongation. This deformation corrects curvature and improves straightness or flatness. During stretching, the applied tensile stress acts together with the existing internal stresses in the material, helping to reduce uneven deformation.

In strip processing, stretch straightening equipment generally uses entry and exit bridle rolls to establish longitudinal tension. The strip undergoes controlled plastic elongation while under tension. Some machines also incorporate bending rolls to bend the material alternately under tensile load. This combined process is commonly known as stretch-bend straightening or tension leveling.

Stretch straightening is mainly used for metal strips and steel strip processing. It helps correct shape defects such as edge waves and center buckles. Wire straightening, however, generally uses roller or rotary straightening units. The pulling tension used to feed wire through a production line is not the same as stretch straightening, which relies primarily on longitudinal plastic elongation.

Selecting the right type of straightening machine

The selection of a straightening machine depends on the workpiece cross-section, dimensions, material properties, initial bending condition, and required straightening accuracy. Press straightening is suitable for localized corrections, roller straightening uses continuous alternating bending, inclined-roll straightening is mainly used for round bars and tubes, and stretch straightening is primarily applied to flat metal products.

Hansheng Automation provides custom machining of nonstandard mechanical components for straightening equipment according to customer-supplied drawings. We accept both single-piece and small-batch machining orders. Our drawing-based precision machining services also cover functional components for tobacco packaging and filling machinery, as well as precision parts for yacht equipment and radio-controlled racing cars.

Mining--Metallurgical-Machinery