Turntable splitter is a kind of machinery commonly used in the electronics, assembly, and packaging industries. With the development of mechanization, the splitter has become the focus of the machinery industry.
Hansheng Automation Co., Ltd. specializes in the production of splitters, complete specifications, affordable prices, and first-class quality! It has been well received by many customers at home and abroad!
Today, Hansheng will talk to you about the solution to the cam abnormality in the turntable splitter!
Cam mechanism is a commonly used machinery, since it is often used, there will be all kinds of problems, but if there are some common problems, you don't have to worry, because there is a way to solve it. The editor lists the solutions to the common faults of the cam mechanism:
First: cam damage
If the damage to the cam in the splitter is minor, it can be used, but the axial position cannot be adjusted without permission, and if there is irreparable damage, the cam can not be used and can be replaced.
Second: If the needle roller bearing in the cam splitting wheel is damaged
The output split shaft needs to be removed to replace the needle roller bearing. There are two ways to replace the needle roller bearing, one of which is to loosen the output sleeve first, and then take out the output shaft, and then not to loosen the gland at the rear end, so that the axial position does not change.
It is very easy to eliminate the fault of the cam mechanism, but it is difficult to keep the cam mechanism from malfunctioning, but the frequency of failure can be reduced through ordinary maintenance, so I hope that you will pay attention to the maintenance of the cam mechanism at ordinary times.