The planetary reducer always vibrates. What are the causes?

Dec 23, 2024 Leave a message

Different from conventional transmission reducing devices are planetary reducers. Several solar gears have been included into this gadget. The planetary gears can be driven to revolve by solar gears, thereby enhancing the work efficiency. Many different sectors also make advantage of planetary reducers. Many individuals still have a limited knowledge of them as their internal structures differ; even more, they do not realize the cause of great equipment vibration. Planetary reducers vibrate substantially for the following five reasons.


1. Can find loose motor screws, akin to coupling failure. The vibration is sent to the planetary reducer when the motor vibrates for different causes, therefore amplifying the vibration;

2. Axial deformation loses equilibrium. The shaft can vibrate and result in significant reducer deformation when the strength and hardness of the shaft below are either needed or the shaft deformation causes the shaft vibration;

 

High-Precision-Stepper-Motor-Planetary-Gearbox-for 2



3. There is gear damage. Severe pitting, great meshing clearance, severe gear wear, fractured teeth, etc., which could be brought on by the reducer failing owing to too great vibration, constitute gear damage;

4. The coupling is ruined. When the coupling is coupled to the reducer owing to pain relief oil, loose screws, etc., it will transfer its vibration to the reducer, so vibrating the reducer abnormally;

5. The foot screw is loose and the bearing is somewhat worn. The long-term running of the planetary reducer causes the foot screw to be either loose or broken, which will undoubtedly cause significant reducer vibration and aberrant working condition.