During the operation of the cam divider, its working principle is to apply force to the cam to drive the processing brick tower to make continuous or intermittent movements. The cam and the needle roller bearing make linear movements and make surface contact. Although it moves in a rolling manner, there is still a certain degree of wear and tear, which can affect the offset of the positioning origin when gaps appear.
At this point, we can adjust the distance between the input axis and the output axis by adjusting the displacement of the induction system and the delay of the induction signal. Due to system vibration, loose fixing screws, and delay of the induction signal, the origin of intermittent motion may also deviate or shift. Relevant inspections can be conducted on the induction system to identify and test the problem points.
The damage to the cam curve can also cause the origin of the splitter to shift. The solution for this situation is to send it to the manufacturer for repair. Legitimate cam splitter manufacturers will provide a free warranty period. If the above phenomena occur during the warranty period, some can be repaired for free. If they are not within the warranty period, many manufacturers can help with free maintenance and charge for replacing spare parts, which can save a lot of costs compared to making a new one.