A hosiery knitting machine produces socks by forming yarn into intermeshing knitted loops. During operation, components such as needles, sinkers, cam systems, yarn feeders, and fabric take-down mechanisms must work together correctly. Regular cleaning, lubrication, and inspection help reduce needle breakage, yarn breaks, dropped stitches, and fabric defects while keeping the machine in proper operating condition.
Maintenance involves more than mechanical servicing. It also includes checking electrical controls, pattern programs, yarn feeding, and knitting parameters. Operators need to understand the machine structure, operating procedures, and control functions to identify abnormalities and carry out the appropriate corrective actions.
Types and basic structures of hosiery knitting machines
Single-cylinder and double-cylinder hosiery knitting machines
Hosiery knitting machines are commonly classified according to their needle cylinder configuration. The two main types are single-cylinder and double-cylinder machines.
Single-cylinder hosiery knitting machines
A single-cylinder machine uses one needle cylinder to form knitted structures. It is commonly used for plain-knit socks and other patterns supported by the machine configuration.
Modern single-cylinder hosiery machines often use electronic control systems. Needle selection, yarn changes, and knitting parameters for different sock sections can be programmed through the control system.
Operators need to understand the machine interface, pattern design, and program settings to ensure that needle movement, yarn feeding, and knitting sequences are properly coordinated.
Double-cylinder hosiery knitting machines
A double-cylinder machine uses two needle cylinders, arranged one above the other, to produce different knitted structures. Depending on the needle arrangement and loop formation method, these machines can produce rib, double-knit, and other sock structures.
Modern double-cylinder machines can also use electronic needle selection, automatic control, and programmed pattern management. The available functions depend on the machine model, cylinder configuration, and needle selection system. Manual needle replacement is not a defining feature of all double-cylinder machines.
The two machine types differ in cylinder structure, needle arrangement, loop formation, and product applications. Maintenance procedures should therefore follow the requirements of the specific machine model.
Main mechanical components of hosiery knitting machines
A hosiery knitting machine generally consists of a yarn feeding system, knitting mechanism, fabric take-down mechanism, drive system, and auxiliary control devices.
Yarn feeding system: Includes the yarn creel, yarn guides, yarn feeding devices, and tension adjustment components. It supplies yarn to the knitting area at a controlled rate.
Knitting mechanism: Mainly consists of the needle cylinder, needles, sinkers, cam system, and associated needle selection devices. These components form the knitted loops and fabric structures.
Fabric take-down mechanism: Pulls the knitted fabric away from the knitting zone and maintains the required take-down condition.
Drive system: Includes the drive motor, transmission shafts, gears, and related components. It supplies power to the needle cylinder and other moving mechanisms.
Auxiliary control devices: May include pattern control, automatic lubrication, lint removal, yarn break detection, needle break detection, automatic stop devices, and production counters.
Machine structures and automation features vary between models. Some machines include automatic lubrication systems, yarn break sensors, and electronic needle selection. Operators need to understand how these devices work and how to interpret their alarm signals.
Knitting structures and process fundamentals
Understanding the basic principles of knitting helps operators identify fabric defects and allows maintenance personnel to check the interaction between needles, sinkers, and cam systems.
Basic knitted fabric structures
According to the method of yarn loop formation, knitted fabrics are mainly classified into two categories: weft-knitted and warp-knitted fabrics. Combined structures can also be produced using different knitting methods.
Hosiery knitting machines generally use small-diameter circular weft-knitting mechanisms. Needles arranged in the cylinder form successive loops to produce knitted fabric.
The loop is the basic structural unit of a knitted fabric. It consists of a needle loop, needle legs, and a sinker loop. The needle loop and needle legs form the main needle loop structure, while the sinker loop connects adjacent needle loops.
The following parameters are commonly used to evaluate knitted fabric structure and properties:
Stitch length: The length of yarn used to form one complete knitted loop. It affects fabric density, thickness, and dimensional stability.
Wale density: The number of vertical columns of loops per unit length.
Course density: The number of horizontal rows of loops per unit length.
Stitch density: The number of loops per unit area, determined by wale density and course density.
Fabric thickness: The thickness of the knitted fabric under specified measurement conditions.
Unroving or unravelling tendency: The tendency of knitted fabric to unravel when yarn or loops are damaged.
Edge curling: The tendency of certain knitted structures to curl at their edges when released from tension.
These parameters affect sock dimensions, elasticity, appearance, and wearing performance. Stitch length, knitting density, and related loop formation settings should be adjusted according to product requirements.
Common knitted structures
Depending on machine configuration and pattern control capabilities, hosiery machines can produce different knitted structures.
Common structures include plain knit, rib knit, double rib, and jacquard.
Plain knit is formed by successive needle loops and is commonly used for sock body sections. Rib knit provides good crosswise elasticity and is suitable for areas such as sock cuffs that require a close fit. Double rib, also known as interlock in relevant knitting constructions, uses a specific needle arrangement and loop formation method determined by the machine configuration.
Jacquard structures are produced by selecting different needles and yarns to create patterns. Single-jersey and double-jersey structures can be used, depending on the machine. Pattern designs may include floats, different color arrangements, and localized structural variations.
Some hosiery machines also support plating, in which different yarns are fed together in a defined arrangement to produce specific surface effects and fabric properties.
Knitted structures are commonly represented using structure diagrams, design charts, and knitting diagrams. Operators need to select the appropriate knitting program according to the structures supported by the machine and its pattern control system.
Not every knitting structure can be produced on every hosiery machine. The available patterns depend on the cylinder arrangement, needle selection system, and the manufacturer's technical specifications.
Routine maintenance of hosiery knitting machines
Hosiery knitting machines contain groups of needles, sinkers, and transmission components operating at high speeds. During prolonged operation, these components are affected by yarn debris, fiber dust, lubrication conditions, and mechanical wear. Maintenance should follow the intervals specified by the machine manufacturer and be adjusted according to operating hours and actual working conditions.
Machine cleaning and lint removal
Hosiery knitting machines generate fiber debris and yarn residue during operation. These materials can accumulate around the needle cylinder, needle grooves, sinker area, yarn feeding devices, and electrical cabinet ventilation openings.
The following areas require regular attention:
Remove yarn residue and fiber dust from the needle cylinder, needle grooves, and sinker area.
Clean the yarn creel, yarn guides, and yarn tension devices.
Check that the suction system and lint extraction passages are clear.
Clean the cooling fan and dust filter in the electrical control cabinet to maintain proper ventilation.
Use suitable tools and cleaning methods to avoid damaging needles, sensors, and other precision components. Parts requiring removal for cleaning should be handled according to the machine manufacturer's instructions.
Inspection of needles, sinkers, and cam systems
Needles and sinkers directly participate in loop formation. Wear or abnormal movement can affect fabric quality.
Routine inspections should cover the following components:
Needles: Check hooks, latches, and stems for bending, cracks, wear, or sticking. Damaged needles should be replaced promptly to prevent dropped stitches, holes, and yarn breaks.
Sinkers: Inspect sinker edges for wear and deformation. Confirm that they move freely and work correctly with the needles.
Cam system: Check working surfaces for wear, scratches, or impact marks. Confirm that the fixing bolts are secure.
Needle grooves and cylinder: Check for accumulated fibers, oil residue, and foreign particles that may obstruct needle movement.
If repeated needle breakage, dropped stitches, or localized knitting defects occur, inspect the interaction between the cylinder, needles, sinkers, and cams rather than replacing individual needles without checking the surrounding components.
Lubrication system inspection
The needle cylinder, needles, cams, and associated transmission components require lubrication according to the machine design. Some modern hosiery machines have automatic lubrication systems that use pumps and pipelines to supply oil to designated points.
Lubrication maintenance includes:
Checking the oil level in the reservoir and keeping it within the specified range.
Inspecting the automatic lubrication pump, filters, and oil supply lines.
Confirming that the required amount of lubricant reaches each lubrication point.
Checking the lubrication condition of the needle cylinder, bearings, and transmission components to prevent insufficient lubrication and abnormal wear.
Inspecting return oil passages to prevent blockages and oil leakage.
Lubricant grade, viscosity, and replacement intervals must follow the machine manufacturer's specifications. Different lubricants should not be substituted without confirmation, as an unsuitable oil may affect needle movement, mechanical lubrication, and fabric surface quality.
Inspection of drive and electrical components
The drive and electrical control systems maintain machine speed and coordinate the movements of different mechanisms.
Inspections should include:
Checking the drive motor for smooth operation, abnormal vibration, and noise.
Inspecting gears, transmission shafts, belts, and couplings for looseness or wear.
Checking that sensors and their mounting brackets are secure and free of fiber dust and oil contamination.
Inspecting electrical terminals, cables, and cooling devices inside the control cabinet.
Testing yarn break, needle break, and other automatic stop functions.
When electrical alarms or abnormal sensor feedback occur, check the displayed information and corresponding signal status before making adjustments. Do not change programs or replace electrical components without identifying the cause of the fault.
Common hosiery knitting machine faults and repair methods
Common faults include broken needles, yarn breaks, dropped stitches, incorrect patterns, uneven loop sizes, and abnormal machine operation. Troubleshooting should begin by identifying the location and symptoms of the fault, followed by inspection of the corresponding mechanical components, yarn supply, and control system.
Needle breakage or damage
Needle breakage may result from prolonged wear, incorrect cam positioning, debris in the needle grooves, or abnormal interaction between needles and sinkers.
During repair, inspect the damaged needle and the adjacent needle positions. Check the cam system and needle grooves for abnormalities. After replacing a needle, verify the condition of its hook, latch, and movement. A low-speed test run may be required according to the manufacturer's procedure.
Yarn breaks and yarn feeding problems
Yarn breaks may be caused by inconsistent yarn quality, excessive yarn tension, worn yarn guides, blocked yarn passages, or abnormal operation of the yarn feeding device.
Start by checking the yarn creel, yarn guides, tension adjustment components, and yarn feeding devices. Confirm that the yarn path is clear, tension settings are appropriate, and sensors can detect yarn breaks correctly.
For repeatedly affected feeding positions, also inspect the yarn contact area around the needles for burrs or abnormal friction.
Dropped stitches and loop formation defects
Dropped stitches, inconsistent stitch length, or localized knitting density variations may result from abnormal needle movement, worn sinkers, incorrect cam adjustment, or fluctuating yarn tension.
Inspect the relationship between the needle cylinder and cam system. Also check stitch length, yarn supply, and knitting program settings.
If the machine's needle selection function is abnormal, inspect the electronic selection device and corresponding control signals. Confirm that the programmed settings match the actual needle movements.
Pattern errors and program faults
On computer-controlled hosiery machines, pattern errors may be related to knitting program settings, needle selection, yarn changeover sequences, or electronic control signals.
Maintenance personnel should check the pattern file, machine parameters, and actual movements of the needle selection mechanism. The yarn feeding sequence must match the programmed needle selection sequence.
Before changing a program or pattern parameter, back up the original file to prevent incorrect modifications from affecting subsequent production.
Abnormal vibration or noise
When abnormal vibration or noise occurs during operation, inspect the drive motor, gears, bearings, transmission shafts, and related mounting components.
Also check the needle cylinder and other rotating components for abnormal runout, loose fits, or mechanical interference. If abnormal noise is accompanied by increased temperature, stop the machine and inspect the lubrication condition and mechanical load.
Safety precautions for hosiery knitting machine maintenance and repair
Hosiery knitting machines contain high-speed rotating components, moving needles, transmission mechanisms, and electrical control systems. Cleaning, lubrication, and repair must follow the machine's safety procedures.
Before cleaning, replacing needles, or removing mechanical components, stop the machine and isolate the main power supply according to the manufacturer's instructions.
For machines equipped with pneumatic devices, isolate the corresponding air supply to prevent unexpected actuator movement.
Confirm that all moving components have come to a complete stop before inspecting the needle cylinder or transmission system.
Use suitable tools when replacing needles, sinkers, and other precision parts to avoid damaging the needle grooves and mounting positions.
After maintenance, check the guards, sensors, and automatic stop functions before conducting a test run according to the prescribed procedure.
Maintenance intervals should be based on the machine model, operating hours, and production environment. The Lonati hosiery machine maintenance manual, for example, specifies inspection procedures for electrical components, sensors, control cabinet ventilation screens, needles, and sinkers. It also requires the use of specified lubricants at designated lubrication points. These intervals apply to the particular machine covered by the manual and should not be treated as universal requirements for all hosiery machines.
Custom machining of precision components for hosiery knitting machines
The knitting accuracy and operating stability of a hosiery machine depend partly on the dimensional accuracy and machining quality of components such as needle cylinders, transmission shafts, bearing housings, cam mounting components, and other mechanical structures.
For non-standard components required for machine maintenance, modification, or supporting equipment production, Hansheng Automation provides custom machining based on customer-supplied drawings and manufacturing requirements. We support both single-piece and small-batch precision component production.
Our drawing-based machining services also cover components for tobacco packaging and filling machinery, precision structural parts for yachts, and components for radio-controlled racing cars. Manufacturing processes are evaluated according to the drawings and specific machining requirements of each component.


