Instructions for common materials and heat treatment processing of machine tool gears

Nov 29, 2024 Leave a message

We all know that machine tool gears can be divided into low speed (speed 2m/s, unit pressure 350-600N/mm^2), medium speed (speed 2-6m/s, unit pressure 100-1000N/mm^2, impact load is not large), and high speed (speed 4-12m/s, bending torque, unit pressure 200-700N/mm^2), but different requirements of products common materials and heat treatment processing and other related details. Do you know, respectively:

 

1. 20Cr carburising, quenching, low temperature tempering HRC 56-62 for high-speed, pressure, medium-rate, impact gears.

 

2. For gears with small circumferential speed and medium unit pressure, 40Cr quenching and tempering, HB 220-250; for gears with medium circumferential speed and light impact load, quenching, tempering, HRC40-50.

 

3. 45 quenching, high temperature tempering, HB200-250 utilised for circumferential speed; 1m/s medium pressure, high frequency quenching; surface hardness HRC52-58; for gears with high surface hardness needs and little deformation.

 

4. Apart from the aforementioned requirements, high-frequency quenching and hardness HRC52-58 are applied in case the deformation remains minimal after heat treatment.

gear manufacturing