The connection methods between cam splitter and gearbox motor mainly include the following:
Direct insertion connection method
Applicable motors: mainly use gear right angle hollow reduction motors and turbine worm reduction motors.
Connection method: Due to the hollow structure of the reduction motor, the input shaft of the cam splitter can be directly inserted into the hollow part of the reduction motor for connection.
Synchronous belt and chain connection method
Applicable situation: Install chain wheels and synchronous wheels for connection, and tighten the synchronous belt and chain by tightening the tension. The advantage of this method is that standard sized cam dividers can be used, which have a short production cycle and may even be available in stock, resulting in fast shipment.
Attention: It is necessary to ensure that the tension of the synchronous belt or chain is moderate to ensure the stability and accuracy of the transmission.
Specific installation method
According to the different connection surfaces of the cam divider and the placement of the motor, various specific installation methods can also be evolved, such as:
1. The cam divider is directly connected to the T-side and the motor is installed horizontally.
2. The cam divider is directly connected to the U-shaped surface, and the motor is installed horizontally.
3. The cam divider is connected to the T-side and the motor is installed vertically.
4. The U-shaped connection of the cam divider and the vertical installation of the motor.
When choosing a specific connection method, it is necessary to consider the actual situation and needs, such as the placement of the motor, space limitations, transmission accuracy, etc.
Precautions
1. Drive angle and static angle: It is necessary to clarify the drive angle and static angle of the cam divider to ensure that the ratio of rotation and static time of the output end face meets actual requirements.
2. Motor power: Based on the output rotational torque of the cam splitter, convert the rotational torque of the input shaft of the splitter, and then convert it into the required power of the motor.
3. Reducer reduction ratio: determined by the indexing time of the cam divider, it is necessary to ensure that the reducer reduction ratio matches the indexing time.
4. Gear reducer type: Choose worm gear or gear reducer according to installation space and customer needs.