How much do you know about Servo Drivers?

Mar 03, 2025 Leave a message

What is a Servo Driver?

A Servo Driver is a high-performance electronic device specifically designed to control a servo motor. It receives motion instructions from an upper-level controller (such as a PLC or motion controller) and adjusts the current and voltage output of the motor in real time through a sophisticated control algorithm (usually using the PID algorithm), so as to achieve precise control of the motor speed, torque and position. As the brain of the servo system, the Servo Driver plays a vital role in the entire automation control system.

 

What is the composition of a Servo Driver?

Servo Drivers usually consist of the following core modules:

Control unit: Built-in high-speed microprocessor, run control algorithms, analyze and calculate input signals.

Power amplification module: PWM modulation technology is used to convert low-power control signals into high-power drive signals to meet the driving needs of servo motors.

Feedback interface: Used to receive real-time feedback data from the servo motor encoder to ensure the accuracy of closed-loop control.

Communication interface: Support EtherCAT, PROFIBUS, CANopen, IO-Link and other industrial protocols to achieve seamless connection with the upper control system.

Protection and monitoring circuits: including over-current, over-voltage, and over-temperature protection circuits to ensure that the system can be automatically protected under abnormal conditions and prolong the life of the equipment.

Composition Of A Servo Driver

How does a Servo Driver work?

The workflow of a Servo Driver can be summarized as a closed-loop control process of "receiving-calculating-amplifying-output-feedback". What follows is a detailed explanation of the process.

 

Signal reception: The higher-level control system sends target motion commands (e.g. target position, speed, or torque) to the drive.

Control calculation: The driver calculates the output signal that needs to be adjusted according to the received instructions and internal algorithms;

Power amplification: The adjusted signal is converted into a high-power drive signal through the power amplification module;

Output to servo motor: The drive transmits high-power signals to the servo motor to achieve actual motion control;

Closed-loop feedback: The motor encoder collects the motor status in real time and feeds the data back to the driver, who continues to adjust the output according to the feedback until the actual motion is consistent with the target.

 

This closed-loop control mechanism ensures the high precision, high dynamic response and stable operation of the servo system, and can maintain efficient automatic control even under load changes or complex working conditions.

 

Why  Servo Drivers are used?

The table below shows how Servo Drivers compare to conventional drives or open-loop control systems in key performance areas:

Compare dimensions

Servo Drivers

Conventional drive/open-loop control system

Control accuracy

Closed-loop control, accuracy up to micron level

Open-loop control, the accuracy is greatly affected by load fluctuations

Responsiveness

The response time is in milliseconds, and the dynamic adjustment is fast

The response is slower and the adjustment lag is noticeable

System stability

Real-time feedback and adjustment to ensure the long-term stability of the system

Lack of feedback mechanism, error accumulation may cause system instability

Energy efficiency performance

High-efficiency PWM modulation, high energy conversion efficiency

The efficiency is lower and the energy loss is larger

Communication and scalability

It supports a variety of industrial protocols and is easy to integrate with the upper-level system

Limited communication functions and poor flexibility in system integration

The data in the table shows that the Servo Driver is superior to the traditional control scheme in terms of accuracy, response speed, stability and energy efficiency, which is an important guarantee for the realization of high-end automation and intelligent manufacturing.

 Mitsubishi MR-J4-70GF Servo Drive MR-J4-70GF Servo Drive Mitsubishi MR-J4-70GF Servo Drive

What are the differences between different brands of Servo Drivers?

At present, the well-known Servo Driver brands in the market mainly include Siemens, Yaskawa, Schneider, Rockwell and Mitsubishi. The following table compares the core features and application areas of each brand's products:

brand

Features & Benefits:

Fields of application

Siemens

Modular design, powerful communication function, high degree of integration

Precision machining, automated assembly, robot systems

Yaskawa

Fast dynamic response, high energy efficiency, excellent anti-interference ability

Robots, CNC machines, heavy-duty and highly dynamic response applications

Tailor

Intelligent control is function-rich, open architecture, and supports a variety of industrial protocols

Building Automation, Industrial Process Control, Energy Management

Allen-Bradley

Programming environment friendly, strong system scalability, standardized product system

Food & Beverage, Standardized Production Line, Automation Control

Mitsubishi

High-speed computing, good stability, adaptable to harsh environments

High-speed assembly, packaging machinery, precision testing equipment

 

In general, as the core controller of driving servo motors, Servo Drivers provide strong technical support for industrial automation with its high precision, fast response and intelligent communication capabilities. If you need various of Servo Driverr and other factory automation parts, feel free to contact us. We are a professional factory automation parts supplier in China with many years of experience.