Functions and types of flying shears in rolling mills

Nov 15, 2026 Leave a message

Nicole Li
Nicole Li
Leading the innovation team, Nicole focuses on researching and developing new products and technologies. Her work is instrumental in keeping Hansheng at the forefront of the automation industry.

 

A flying shear is a machine used to cut moving rolled stock transversely during rolling operations. It can perform cut-to-length operations, crop the head and tail of the material, and cut stock without stopping the production line. This makes it suitable for continuous rolling processes.

According to their cutting mechanisms and blade movements, flying shears are generally classified into four types: disc-type, double-drum, crank-type rotary, and pendulum flying shears. These designs differ in cutting speed, suitable material thickness, cut surface quality, and mechanical complexity.

Main functions of flying shears in rolling mills

Flying shears are used to cut moving rolled stock transversely at different stages of steel production.

Cut-to-length operations and head and tail cropping

During rolling, a flying shear cuts the moving stock at preset lengths. It can also remove defective or irregular head and tail sections. By controlling the cutting position and timing, the shear produces lengths that meet the requirements of downstream operations such as cooling bed transfer, finishing, and further processing.

Maintaining continuous production

A flying shear cuts the material while it continues to move, eliminating the need to stop the rolling line for each cutting operation. This reduces waiting time between processes and prevents excessively long material from interfering with downstream equipment.

Improving cut surface quality

The blade trajectory and cutting method affect the quality of the cut surface. Selecting an appropriate vertical or translational cutting arrangement can help reduce burrs, deformation, and uneven cut surfaces to meet the requirements of different rolled products.

Common types of flying shears and their characteristics

Disc-type flying shear

Structure and operating principle

A disc-type flying shear mainly consists of two or more pairs of circular blades. During cutting, the tangential blade speed must be coordinated with the stock speed so that the material can be cut while moving continuously.

In some designs, the stock passes through an entry guide and triggers a flag switch or photoelectric sensor. The guide then deflects, directing the stock between the blades for cutting. After the cut, the guide returns to its original position for the next operation.

Typical applications

Rough cropping before the cooling bed in small rolling mills to prevent excessively long stock from reaching downstream equipment.

Head cropping before finishing stands to ensure stable entry into subsequent rolling operations.

Advantages and limitations

Disc-type flying shears have a relatively simple structure and reliable operation. Their cutting speed can exceed 10 m/s.

The main limitation is that the cut surface is generally inclined rather than perpendicular to the stock axis. This is usually acceptable for head cropping and rough cutting applications.

Double-drum flying shear

Structure and operating principle

A double-drum flying shear consists of two counter-rotating drums with blades mounted radially on their surfaces. As the stock passes between the drums, the rotating blades cut through the material.

During cutting, the tangential speed of the blades at the cutting position must be coordinated with the stock speed. In some designs, the blade peripheral speed is set slightly higher than the stock speed as it enters the material to meet the required cutting motion and reduce bending at the entry.

Typical applications

Double-drum flying shears are mainly used for high-speed cutting of small-section structural steel and thin sheet products.

Advantages and limitations

This design is suitable for high-speed cutting of thin rolled products and supports rapid operation on continuous production lines.

However, the cut surface may become uneven when cutting thicker stock. Cutting wide steel plates also requires relatively high shear force.

Crank-type rotary flying shear

Structure and operating principle

A crank-type rotary flying shear uses a four-bar linkage mechanism. An eccentric sleeve and connecting rods drive the blade holder, producing translational or near-translational movement during cutting.

This arrangement allows the blade to remain perpendicular or nearly perpendicular to the surface of the rolled material, reducing the inclination of the cut and improving cut surface flatness.

Typical applications

Crank-type rotary flying shears are mainly used for cutting thick steel plates and billets with relatively large cross-sections. They are suitable for operations requiring good cut surface quality.

Advantages and limitations

This design produces relatively flat cut surfaces. Inclined blades can also be used to reduce the instantaneous shear force.

Its main limitations are mechanical complexity, a larger number of moving components, relatively poor dynamic performance, and restrictions on blade speed imposed by the linkage mechanism.

Pendulum flying shear

Structure and operating principle

A pendulum flying shear uses a swinging frame and blade holder mechanism to cut the rolled material. Depending on the operating arrangement, it can perform stationary-frame cutting or flying cutting.

In the stationary-frame cutting arrangement, the upper blade holder is mounted on the swinging frame, while the lower blade holder is connected to the main shaft through a connecting rod and eccentric mechanism. As the main shaft rotates, the upper and lower blade holders move in opposite directions to complete the cut.

In the flying-cutting arrangement, an eccentric rod, rear shaft, and synchronizing mechanism drive the swinging frame back and forth. The blade holder moves in a translational path during cutting to shear the continuously moving material.

Typical applications

Pendulum flying shears are mainly used in cross-cutting sections of continuous steel plate rolling lines, particularly where cut surface quality needs to be controlled.

Advantages and limitations

Pendulum flying shears produce relatively flat cut surfaces and provide good cutting quality.

The flying-cutting arrangement requires a complex synchronizing mechanism. Its mechanical structure and control requirements are therefore higher, resulting in greater manufacturing and operating costs.

Factors to consider when selecting a flying shear

Flying shear selection should take into account the stock cross-section, material thickness, operating speed, and required cut quality. The decision should not be based solely on the machine type or maximum cutting speed.

Match the shear to the stock dimensions

Disc-type and double-drum flying shears can be considered for small-section structural steel and thin sheet products.

Crank-type rotary flying shears are more suitable for thicker plates and billets when good cut surface quality is required. Pendulum flying shears can be considered for high-precision plate cross-cutting lines.

Match the shear to the rolling speed

The blade movement must remain coordinated with the stock speed. For high-speed rolling lines, the shear response, cutting cycle, and blade movement characteristics must be considered to ensure cutting at the required length.

Consider cut surface requirements

When a production process requires a flat cut surface, particular attention should be paid to the blade trajectory and cutting method. Double-drum flying shears have limitations in cut quality and shear force when used for thicker or wider stock, and should be selected accordingly.

The choice of flying shear affects both cutting efficiency and rolled product quality. Selection should account for material dimensions, production speed, cutting length, and downstream process requirements.

Custom machining of components for rolling mill flying shears

The manufacture and maintenance of flying shears involve various mechanical and transmission components, including crankshafts, eccentric shafts, drive shafts, blade holder connectors, and bearing housings. Different shear designs have specific requirements for component dimensions, fits, and operating stability.

We provide precision machining based on customer-supplied drawings and support both single-piece and small-batch orders. Hansheng Automation machines shafts, transmission components, and other non-standard mechanical parts for rolling mills and automated production lines.

Our precision machining services also cover other industries, including structural components for yacht equipment, RC racing car parts, tobacco packaging machinery components, and parts for filling machinery. We manufacture non-standard precision components according to customer drawings for different equipment applications.

Mining--Metallurgical-Machinery