1,Transmission components such as gears, pulleys, chains, keys, keyways, etc., gap sliding or screws loose, insufficient rigidity of the structure, etc.
2. The rotary instability of the driving system. Belt, chain tension is too large, tension is not enough, power transmission wheel concentricity, poor flatness.
3,The bending, deformation, concentricity, poor flatness of the disk of the positioning system of the work station, and the poor positioning correction of the work tool.
The friction torque of the power transmission system is unstable, such as transmission idling, sliding, loose locking part and other defects.
5, the inertia of the splitter vibration, the impact of the change of the load, the work station disk distance is too large, the fixture is too heavy, overload, overweight torque value bearing.
6, water, acid, alkali, dusty environment easy to rust environment, did not do the isolation of protection and regular cleaning and maintenance of improper management.
7,No regular oil supplement, replacement, improper oil mixing.
8,Installation of splitter datum fixed rigidity is insufficient. Insufficient rigidity of the machine, co-vibration structure, poor shock absorption conditions.
So the splitter should always clean up the debris around the drive system, undercutting material, etc. during the use of the splitter. In order to prevent blocking card movement. With the input and output shaft connectors and transmission parts should be regularly overhauled. Pay attention to the coupling, pulley, sprocket, gears and output transmission body and other slack, belt, sprocket tension, gear mesh clearance, etc. should be absolutely ensure the normal state. Discover the problem in time to contact the manufacturer!