A micro motor's reversing positioning gear system consists of a stator coil, a rotor, and a reduction gear set fitted within a cup-shaped casing. At least one set of variable speed gears forms the reduction gear set that links the rotor to the output shaft. The cup-shaped shell also has a rotor rotor, and on one side of it a reversing positioning gear is set-up. The reversing positioning gear consists of a gear, an elastic open ring and a spacer; one side of the gear is given a recessed surface to fit the elastic open ring and a spacer, and the three are mounted with the same central shaft as the reference.
By means of the bump, the elastic open ring in the recessed surface of the gear contacts the recessed surface to provide enough friction, thereby ensuring the stable functioning of the gear and realising the reversing positioning simultaneously. The contact between the positioning block and the stopper strengthens the gear placement action even more. The gasket is linked with the bending section of the elastic opening ring via the protruding tongue on it. Apart from streamlining the mechanical construction, this design enhances the precision of placement and operating dependability.
First of all, the design is reasonable, the installation is straightforward, and the adjustment can be easily realised; second, the performance is steady, the placement is precise, and it is fit for a range of micro motor application situations; Third, mass production finds the manufacturing cost cheap, the processing technology is very basic, and it is easy. This reversing position gear system provides a dependable solution for the pragmatic use of micro motors by means of a clever mix of components balancing the need for cheap cost and great performance.
If you need anything further, you may get in touch with us; if there is a mistake, you are free to point out; if your own knowledge of the commutation placement gear structure of the micro motor differs from this, we will do our best to assist you.

