Common Types of Bag-Feeding Vacuum Packaging Machines

Oct 06, 2026 Leave a message

David Park
David Park
A control systems engineer with expertise in automation solutions, David works on developing innovative control technologies that enhance the efficiency and precision of our gear reducers.

 

Bag-feeding vacuum packaging machines use pre-made pouches. Common models include the 220 double turntable, 220 high speed, 160 double turntable, and 130 double turntable.

 

Shared points on the 220 and 160 series

The filling system and vacuum system are separate rotary units. The filling system runs with intermittent rotary motion. The vacuum system runs with continuous rotary motion.

When pouch size changes, the automatic bag feeder width adjusts in one step.

Parts that contact product or pouches are stainless steel or another food-grade material. The machines meet hygiene standards for food processing machinery.

The vacuum chamber can be washed. Cleaning is simple.

Pre-made pouches reduce packaging material loss. Print quality is good, and seal quality is good. If no product is fed, the machine does not seal, and the pouch can be reused.

Operation uses a PLC plus POD touchscreen control system. The HMI is friendly. Pneumatic component angle and time can be adjusted automatically.

Seal temperature is monitored. If a heating tube or thermocouple fails, the touchscreen shows an alarm.

Model 220 double turntable bag-feeding vacuum packaging machine

This is part of a full automatic bag-feeding vacuum packaging series. It has multiple functions and can connect with other equipment to meet different product packaging needs.

Model 220 high speed bag-feeding vacuum packaging machine

It shares the functions of the full automatic bag-feeding vacuum packaging series and can work with other equipment.

It uses the same separate rotary filling and vacuum units as the 220 double turntable. Pouch size changes are quick, and the automatic bag feeder width adjusts in one step.

The vacuum pump is external. The air source must be supplied separately. The vacuum chamber is vertical.

Output is 10 to 45 bags per minute. Pouch width range is 80 to 220 mm. Pouch length range is 150 to 300 mm.

 

Model 160 double turntable bag-feeding vacuum packaging machine

Equipment name: automatic rotary bag-feeding packaging machine, coder not included. Model: SL-160.

It handles a wide range of granular and block materials in different shapes, conditions, and properties. It runs different pouch types.

The filling system and vacuum system are separate rotary units.

Control uses a PLC. The HMI is direct. Product changeover takes about five minutes.

Weighing and packaging run without manual work. Faults trigger automatic alarms. The machine checks bag opening. If conditions are not right for filling, it does not fill and does not heat seal.

Packaging area parts are stainless steel and meet GMP requirements. Some assemblies use imported plastic bearings with tolerance control and no oil lubrication. An oil-free vacuum pump avoids contamination in the production area.

Pre-made pouches give high seal quality. The vacuum chamber can be washed. Vacuum level reaches 5 mbar.

Heating uses a carbon brush type method with stable performance. Heat sealing uses imported heating strips for long service life. The structure is simple and reasonable, the load is light, and the failure rate is low. Independent vacuum and two stations with two vacuum cycles maintain vacuum level.

 

Model 130 double turntable bag-feeding vacuum packaging machine

Main machine options include elevator, combination weigher, hopper scale, manual feeder, dosing machine, and packaging machine.

Pre-made pouches reduce material loss, give good print quality, and produce a good seal. They also improve product presentation. Operation uses a PLC plus POD touchscreen control system. The HMI is friendly. Pneumatic component angle and time can be adjusted automatically.

If heating strips, sealing jaws, pouch clamps, or vacuum chamber parts wear out, Hansheng Automation can machine replacements from customer drawings in single pieces or small batches.

PRECISION-PARTSFOR-PACKAGINGMACHINERY