Preface
The characteristics of turning CNC machining technology are mainly from the determination of the positioning datum of parts processing, the processing requirements of CNC machining on the blank, the experience of process division of labor, and the selection of tools and cutting parameters. For ease of understanding, all aspects are combined with practical examples. In addition, it focuses on the optimization of NC programs, including the use of cycle programs to avoid toolpath idling. machining process, and apply subroutines. The differences before and after optimization are compared with examples to show the superiority of the reasonable solution. Combined with the actual processing experience on site, a method for eliminating knife marks and removing thread burrs in the machining process is provided, and the processing program is given.

At present, the application of CNC cutting technology has entered an unprecedented period of rapid development and is developing in the direction of high speed and efficiency. How to improve the processing efficiency of CNC machining machine tools has become a new topic in front of us. Understanding the characteristics of CNC machining, determining a reasonable CNC machining process, selecting efficient tools, and compiling reasonable programs are the keys to improving machining efficiency.
CNC machining process characteristics
There are similarities and differences between the parts processed by CNC machining machines and those processed by ordinary machine tools. CNC machine tools are processed in strict accordance with the processing procedures, and the processed workpieces are usually more complex than those processed by ordinary machine tools. Before CNC machine tool processing, the motion process of the machine tool, the machining process of the part, the shape of the tool, the amount of removal and the tool path must be programmed into the program.According to practical experience, the CNC machining process has the following characteristics.
1. There is an accurate positioning datum.
In order to improve the processing efficiency during batch processing, the zero point of the program is not changed after the program is compiled and the first piece of trial cutting is completed. Therefore, it is required that the position of each part clamped on the machine must be determined by the machine tool. The default position is the same as the first post. Therefore, it is important that each part has the same and accurate positioning reference on the machine [3]. For example, turning short rod parts, the datum is generally on the end face of the chuck or the step of the three jaws; For turning slender parts (parts that need to be sandwiched in the spindle hole during machining), the datum is generally guaranteed by a stepped sleeve; For special parts, it is necessary to find a specific clamping method according to the shape of the part. In short, it is necessary to ensure that the Z-axis coordinates of the parts on the machine tool remain unchanged during clamping.
2. There are certain requirements for blanks.
According to the characteristics of CNC machining and positioning, CNC machining also has certain requirements for the shape and size of the blank. The margins of each part of the blank should be as consistent as possible, and the deviation should be kept within 2mm. In this way, in CNC machining, it can not only reduce the number of unnecessary empty walkways, improve processing efficiency, but also avoid accidents such as collisions and collisions.
3. Divide the process by tool.
In addition to following the general process principles, the CNC machining process should also consider giving full play to the functions of the CNC machine tools used and focusing the process as much as possible. All processes should be completed as soon as possible. Since CNC tools play a pivotal role in CNC machining and are the key to the high efficiency of CNC machining machine tools, the process is often divided according to the tools used. A total of 5 tools are required to machine the parts shown, namely offset tools, external groove tools, face groove tools, external thread tools and drills. During machining, 111 is set with an offset cutter first, and the thread outer diameter 100 and the end face step are processed, and then the tool is changed.
4. The choice of tools and cutting parameters is very important.
The high efficiency of CNC machining machine tools largely depends on the tool, and only by choosing the right tool can the performance of the CNC machine tool be fully utilized. Nowadays, there are many kinds of domestic and imported CNC tools. Large tool companies generally indicate the blade brand, applicable materials and cutting parameters on the knife box. First of all, according to the machined parts; Select the insert type based on the material and the machined part (e.g., external circle, thread, face groove, etc.), and then select the specific insert based on roughing and finishing. Once the insert has been determined, the corresponding cutting data can be determined.
Optimize the CNC machining program
When machining parts on ordinary machine tools, the machining process is usually written on the machining process card. The operator processes the part according to the "program" specified in the process card. Cutting data and toolpaths are determined by the operator based on experience and regulations. However, when machining parts on a CNC machine tool, all the processes and process parameters of the machined parts must be programmed and entered into the machine tool in the form of code to realize the processing of the parts. Therefore, the work of programming is very important. If the programming is reasonable, it can not only process high-quality parts, but also improve processing efficiency.
1. Adopt a circular scheme
The cycle program is widely used in the programming of plane end face, car outer circle, drilling, boring, etc., which greatly simplifies the program structure, reduces the programming workload, and improves the processing efficiency.
2. Avoid toolpath idling during CNC machining
Using a looping program in programming can certainly simplify the program, but it's not always good to use it. When the shape of the part has steps and the machining allowance is uneven, the cycle program is generally not used to avoid idling. The blank shape is rough turned, and the 2nd order has a large axial allowance. If a looping program is used, a large amount of air transmission will be generated; If you do not use the cycle program, you can first turn the two step surfaces with a large margin according to the incoming material, and then the shape of the car will avoid the empty cut-off, which improves the CNC machining efficiency.
3. Application subroutines
The application of subroutines in the program can simplify the main program, reduce the programming workload, and improve the processing efficiency. Parts of the same series of lengths and diameters can share a single subroutine.
4. Thread deburring
The thread burrs are removed by hand with sandpaper on the general lathe, and the burrs are automatically removed by program with a grooving knife on the CNC lathe.
Conclusion
To sum up, there are many differences between CNC machining and ordinary machine tool machining. It has its own processing process characteristics, and there are many particularities and shortcuts in programming. Only by fully mastering and using them can we really give full play to the high efficiency of CNC machine tools and make them better serve us.
