Adjustment of Hansheng cam indexer

Oct 17, 2024 Leave a message

Main function of cam indexer

The main function of Hansheng Automation cam indexer is to divide an item into several sections or pieces. According to its function and application field, dividers can be divided into many types, including but not limited to: flange divider, spindle divider, ultra-thin platform divider, platform divider, flat plate divider, assembly industry divider, packaging industry divider, hardware machinery industry divider, electronic and electrical equipment industry divider, lithium battery equipment industry divider, printing machinery industry divider, etc.

 

info-400-300

 

Adjustment of cam divider

An important factor affecting the segmentation accuracy and service life of Hansheng Automation cam divider is adjustment. When leaving the factory, the product is carefully assembled and adjusted. If it is not adjusted properly, it may significantly affect the segmentation accuracy, cause impact, noise and other problems, damage the divider, and fail to achieve the expected speed and load capacity, thereby shortening its service life. Adjustment needs to be carried out from the following two aspects:

 

Adjustment of the distance between axes

If the Hansheng Automation cam indexer is worn after long-term use, resulting in a gap in the positioning work area, it is necessary to eliminate this gap by adjusting the distance between axes. This can be achieved by synchronously adjusting the eccentric sleeves at both ends of the input shaft.

 

Adjustment of input and output axial position

The axial position of the cam indexer can be adjusted by adjusting the locking nuts on both sides of the cam or the bearing glands on both sides of the input shaft. In addition, the axial position of the dividing wheel can be adjusted by adjusting the bearing glands at both ends of the output shaft or the locking nuts at the rear end.

 

Notes

Please note: Hansheng Automation cam indexers are carefully adjusted by professionals when leaving the factory. Users are not allowed to make adjustments privately to prevent misadjustment. If adjustment is really necessary, please contact the manufacturer.