As domestic equipment manufacturers accelerate their pace of going global, international certification and stable supply of core components have become key. In response to the demand for equipment exports, the Laoyi Test IS D series inductive sensor solution has emerged. This series has three core advantages: UL certification, fast delivery across the entire range, and industrial grade durable design, providing you with reliable support for your equipment going global.
Facing the Three Major Challenges of Equipment Going Global
- UL certification guarantee: meets the requirements of international standards
- Fast batch delivery: supports large-scale equipment assembly requirements
- Global environmental adaptation: working in a wide temperature range of -25 ℃ to 70 ℃
Industrial scene hardcore configuration
- Pressure resistant design: IP67 protection level, able to withstand complex working conditions such as oil pollution, dust, vibration, etc
- Flexible installation: both flush and non flush versions, adapted to different detection distance requirements
- Intelligent Connection: Choose between M8/M12 connectors and 2-meter reinforced cables, with bending protection design to extend service life
- Visual operation: 360 ° circular LED status indication, improving equipment debugging efficiency.
- application
Terminal position detection of cargo platform
Requirement: For example, when using a forklift or a vehicle with a movable cargo platform, the end position of the fork or telescopic fork must be checked in order to stop the lifting operation and drive the vehicle forward.
Solution: The IS D series inductive sensor can reliably detect the end position of the metal boom. According to the required switch distance and assembly method, both flush and non flush versions can be provided. For example, the triggering distance of the flush type IS D12MM/4NO-4E0 can achieve a maximum of 4 mm.
Jump roller position detection
Requirement: For adhesive labeling machines, it is necessary to use pre tensioned free (jumping) rollers to detect belt tension or carrier belt breakage. The position must be adjusted according to different label materials.
Solution: Inductive sensors can detect the position of the metal base of the roller (such as when the carrier tape is torn), and then send corresponding signals to correct defects. The IS D series has a compact structure and cable bending protection function (such as IS D08MM/4NO), which is very suitable for this application.