Hansheng Automation (Dongguan) Co., Ltd. is one of the most experienced manufacturers and suppliers of suction tape nylon belt in China. If you're going to wholesale bulk cost-effective suction tape nylon belt made in China, welcome to get pricelist and quotation from our factory. Also, customized service and OEM&ODM service are available.
The Hansheng tobacco suction tape nylon belt is a precision-engineered conveyor component used in the tobacco rod transport section of cigarette making machines. Manufactured from PA66-grade nylon with an anti-static surface treatment (surface resistance 10⁶–10⁹ Ω) and air permeability ≥ 100 L/m²·s, it maintains consistent negative-pressure grip on tobacco rods at line speeds up to 10,000 cigarettes per minute. Compatible with Molins MK8/MK9, HAUNI Protos, KDF, GD, and Decouflé platforms. Standard dimensions and custom sizes are both available from our Dongguan manufacturing facility.
Product Advantages and Features
Suction tape nylon belt is an essential part of cigarette production equipment and is mainly used for the stable transportation of cigarettes and filter sticks. The advantages are as follows
By means of surface smoothness and adsorption performance of tobacco nylon suction tape, the cigarettes remain stable and not deviated during the conveying process, thereby preventing production waste resulting from inadequate conveyance.
Reduced frequency of replacement and downtime results from the adsorption belt maintaining consistent performance during high-frequency and long-term use by means of wear-resistant nylon materials and optimal techniques.
Molins, Hauni and other brands, and supports a range of requirements to satisfy the needs of many production lines; the product can be extensively utilised in a variety of cigarette manufacturing equipment.
The adsorption belt is rather well-made to allow fast installation and replacement, so minimising equipment maintenance time and raising production efficiency.
Tobacco products' safety is guaranteed by the nylon material, which satisfies environmental protection criteria, does not contain dangerous chemicals, and generates no toxic volatiles during usage.


Product Basic Information (Key Parameters Table)
| Parameters | |
|---|---|
| Dimensions | 4000×8.2 mm (standard); custom sizes available4000×8.2mm (standard); custom sizes available |
| Material | High-strength Nylon (Polyamide PA66) |
| Tensile Strength | ≥80 MPa≥80MPa |
| Air Permeability | ≥100 L/m2s≥100L/m2s |
| Surface Resistance | 106−109 Ω (anti-static)106−109Ω(anti-static) |
| Operating Temp. Range | −30∘C−30∘C to +150∘C+150∘C |
| Service Life | ≥12 months under normal production conditions≥12months under normal production conditions |
| Compatible Machines | Molins MK8/MK9, HAUNI Protos, KDF, GD series |
| MOQ | 5 pcs |
| Customization | Per customer drawing or sample |
| Origin | Dongguan, Guangdong, China |
Mainstream Device Compatibility Chart (By Brand)
| Brand | Machine Model | Belt Dimensions (mm) |
|---|---|---|
| Molins | Mark 8 | 2489 × 21 |
| Molins | Mark 9 | 2800 × 21 |
| Molins | Passim | 3135 × 21 |
| HAUNI | Protos | 3100 × 21 |
| HAUNI | Protos 90E | 3830 × 21 |
| HAUNI | Protos 2 / P2-2 | 3930 × 21 |
| KDF | KDF2 | 2715 × 18.5 |
| GD | 1-2-1 / 1-2-2 Plus | 2790 × 21 |
| Decouflé | Loga 1/2/3D | 3080 × 21 |
| Various | Custom specification | 4000 × 8.2 (and others) |
Manufacturing Process & Quality Control
Made from high-strength nylon fibres and using cutting-edge weaving techniques, the suction tape nylon belt strict control of the fibre density and texture direction throughout the weaving process guarantees the tensile performance and stability of the adsorption belt during high-speed running.
Usually using a multi-layer composite construction, the adsorption belt consists of a tensile core layer, an adsorption layer, and a wear-resistant surface layer.
Boost the surface smoothness and lower the friction with the cigarette when driving.
Maximise pore distribution to provide steady capacity for adsorption.
Tensile core layer
Give great tensile strength to stop long-term usage's deformation or breaking.
The nylon adsorption belt uses laser cutting technology in manufacture to guarantee smooth edges and no burrs, therefore meeting the size criteria of many equipment. The splicing method improves the belt's general strength by means of flawless connection obtained using high-temperature hot pressing technology.
Anti-static and anti-slip coating treats the surface to increase the stability of cigarette transportation and prevent static electricity interference in the tobacco manufacture process.
Why PA66 Nylon: Material Properties Explained
| Material Characteristic Category | Specific Performance | Value for Tobacco Production |
|---|---|---|
| High Toughness & Strength | Tensile strength ≥ 80MPa, tear strength ≥ 20kN/m | Withstands high-frequency bending (tobacco machine conveyor belts require frequent steering) without fracture risk |
| Excellent Wear Resistance | Abrasion loss ≤ 0.05g/1000 rotations (CS-10 grinding wheel) | Endures long-term friction with cigarettes, extending service life to over 12 months |
| Anti-Aging & Heat Resistance | Stable performance in -30℃ to 150℃ environment, aging coefficient ≥ 0.8 | Adapts to high-temperature (drying process) and low-temperature (storage) environments of tobacco production lines with no performance degradation |
| High Adsorption Capacity | Air permeability ≥ 100L/m²·s | Matches the negative pressure adsorption system of tobacco machines to ensure stable cigarette adsorption |
| Anti-Static Property | Surface resistance 10^6-10^9Ω | Prevents static adsorption of dust or cigarette deviation, ensuring conveying accuracy |
FAQ
Q: What is the correct suction tape belt size for Molins MK8 vs. MK9?
A: Molins MK8: 2489 × 21 mm
Molins MK9: 2800 × 21 mm
Note: Using the wrong circumference causes belt slip and misalignment. Always verify with your machine manual. If ordering for multiple machine generations, simply provide the model numbers and we will confirm the exact dimensions.
Q: How do I know when the suction tape belt needs replacement?
A: Standard service life is 10 to 14 months (shorter for extended shifts or sticky tobacco).
Surface Glazing: Flattened, polished, or abraded surfaces reduce air permeability.
Physical Damage: Edge fraying or splice separation, which causes tension imbalances.
Q: What is the difference between PA6 and PA66 nylon for tobacco belts?
A: For high-speed lines (6,000+ cigs/min, e.g., HAUNI Protos, Molins, GD), PA66 is the required OEM standard.
Better Heat Resistance: PA66 melts at 255°C (vs. 220°C for PA6).
Higher Stability: PA6 easily absorbs moisture and swells in humid factories. PA66 maintains strict dimensional stability under high tension.
(We strongly advise against using PA6 as a cheaper substitute for PA66).
Q: Can suction tape belts be used interchangeably on HAUNI and Molins?
A: No. Different platforms require specific circumferences and widths.
HAUNI Protos: 3100 × 21 mm
Molins MK8: 2489 × 21 mm
KDF machines: 18.5 mm width
For mixed-brand facilities, maintain separate SKUs. We can supply consolidated orders with each belt clearly labeled by machine model to simplify your inventory.
Q: What is the MOQ and lead time for standard and custom belts?
A: Standard Sizes: MOQ 5 pieces.
Custom Sizes (special widths, circumferences, or perforations): MOQ 10 pieces.
Custom Lead Time: 10–15 business days after drawing confirmation.
To order custom belts: Submit a 2D drawing (PDF/DWG) or send a physical sample for reverse measurement. Our engineering team will issue a spec sheet for your final approval before production.
Hot Tags: Suction Tape Nylon Belt, China Suction Tape Nylon Belt manufacturers, high-strength nylon conveyor belt, anti-static tobacco suction belt, Molins MK8/MK9 spare parts, wear-resistant suction belt



